Web Operation 43
4.3.3.3 Signal on Wall
Output a signal to a window on the video wall, and you can view video of the signal on the
screen.
Select a window on the video wall, or press and hold left mouse button to select an
Step 1
area on the video wall.
Select signal source from
Device
or
Custom
tab. Take
Device
for example. See Figure
Step 2
Select signal source
Figure 4-9
Display signal on the video wall.
Step 3
Press and hold left mouse button, drag the signal to designated window, and the
signal is output to the window.
Select a window, double-click channel preview or main/sub stream, and the signal
is output to the window.
4.3.3.4 Signal Tour
Drag the configured signal group to a window, to tour play the signals on the window. Set the
stay time and stream type.
Configure signal group in
Collection
tab. See "4.5.4.3 Signal Group."
Select a window to tour signal.
Step 1
In
Custom > Collection
interface, select a signal group, press and hold left mouse
Step 2
button to drag the signal group to designated window.
The window will start signal tour automatically.
Click
at the bottom of the interface.
Step 3
All signal information in the window is displayed. See Figure 4-10.
Signal information
Figure 4-10
Set Stay Time and Stream Type.
Step 4
Click
corresponding to one signal, and the signal will not appear in the tour
queue, but the signal group still exists.
Click
or
to adjust signal tour sequence.
The setting takes effect immediately.
Click
at the top right corner of window, so you can stop signal tour.