Standby Attitude Module (MD302)
The Mid-Continent Instruments and Avionics MD302 Standby Attitude Module
consists of two LCD screens:
-
one for the display of airplane attitude (pitch, roll and magnetic heading),
-
one for the display of airplane altitude and airspeed.
The MD302 is powered from the ESS BUS 2 bar (protected by the STBY INSTR
breaker) or by the module's internal replaceable battery, ensuring that the airplane
can continue safe flight and landing in the event of a loss of the primary attitude
and air data displays.
Dynamic and static pressure is provided to the MD302 solid state electronic
sensors using the airplane's pitot probe and static sources.
The magnetic heading data is provided by the MD32 magnetometer installed on
the left wing.
The standby attitude module is located on the instrument panel's top left-hand
corner.
Section 7
Description
Pilot's Information Manual
PIM TBM 960 - Edition 0
Rev. 00
Page 7.13.4
PIM - DO NOT USE FOR FLIGHT OPERATIONS