WARNING
HomeSafe deactivation must be performed by a pilot who is:
-
fully capable of flying the airplane, and
-
fully aware of all actions needed to be
performed in reconfiguring the
airplane (the flight plan in the FMS is
lost, the landing gear and flap
positions may not agree with the lever
positions for the landing gear and
flaps).
If the pilot is no longer incapacitated and is able to fly the airplane, he/she must
deactivate HomeSafe before taking control of the airplane.
The airplane must be inspected by maintenance personnel before further flight if
HomeSafe completes a landing.
GNSS (GPS/SBAS) Navigation Equipment Approvals
The Garmin GNSS navigation system installed in this airplane:
-
is a GPS system with a Satellite Based Augmentation System (SBAS)
comprised of:
.
two TSO-C145d Class 3 approved Garmin GIAs,
.
TSO-C146d Class 3 approved Garmin GDUs Display Units,
.
Garmin GA36 and GA37 antennas,
.
GPS software version 7.0 or later approved version.
-
is installed in this airplane in accordance with AC 20-138A,
-
is, as installed in this airplane, approved for navigation using GPS and GPS/
SBAS (within the coverage of a SBAS complying with ICAO Annex 10) for
IFR enroute, terminal area, and RNP APCH operations (to LNAV, LNAV/
VNAV and LPV minima),
-
is, as installed in this airplane, complying with the equipment, performance,
and functional requirements to conduct RNAV and RNP operations in
accordance with the applicable requirements of the reference documents
listed in the following table.
NOTE
Depending on the area of navigation, an operational approval may be required
to use the navigation performance that are detailed in the table hereafter. The
pilot is responsible to ensure compliance with current operational requirements.
Pilot's Information Manual
Section 2
Limitations
PIM TBM 960 - Edition 0
Rev. 00
Page 2.6.3
PIM - DO NOT USE FOR FLIGHT OPERATIONS