Inside Inspection 1 / 3
After completion of preflight inspection.
Initial inside inspection and outside inspection performed. Oxygen cylinder open.
1
- Cabin door and pilot door, if installed ................................... Closed / Locked
2
- Baggage ............................................................................................. Stowed
3
- EMERGENCY EXIT pin .................................................................. Removed
4
- Seats, pedals, harness .............................................................. Adjust / Lock
CAUTION
It is recommended to set the seat to the highest position before adjusting
the front seats fore or aft. Otherwise, moving the seat may damage the
upholstery on the side panels.
Adjust pilot seat and right-side front seat, if occupied:
NOTE
Adjust seats and harnesses to ensure access to flight controls. The
pilot at left-side station must be able to easily reach ECS and
PRESSURIZATION panels.
5
- Height adjustment ........................................................... Max. UP
6
- Fore and aft adjustment ........................ Adjust and check locking
7
- Height adjustment ............................................................... Adjust
8
- Left-side and right-side pedals ........................................... Adjust
9
- Pilot's and passengers' belts and harnesses .................... Fasten
Ensure correct positioning of front seat
occupiers’ safety belt buckles by using the
buckle positioners
Continue ►
Pilot's Information Manual
Section 4
Normal Procedures
PIM TBM 960 - Edition 0
Rev. 01
Page 4.4.16
PIM - DO NOT USE FOR FLIGHT OPERATIONS