ACFT CONF MISM
1 / 1
With or without
GEAR UNSAFE
.
Indicates that the flaps and/or landing gear positions do not agree with the FLAPS
and LANDING GEAR levers positions.
1
- Flaps and landing gear configuration ................................................... Check
2
- FLAPS lever .................................................. Set to agree with flaps position
3
- LANDING GEAR lever ...................... Set to agree with landing gear position
Maximum airspeeds:
Flaps TO
178 KIAS
Flaps LDG
122 KIAS
Landing gear down
178 KIAS
Landing gear extension
178 KIAS
Landing gear retraction
150 KIAS
If
GEAR UNSAFE
is ON:
4
- Perform procedure .....................
Landing Gear Extension Discrepancy
End of procedure.
Pilot's Information Manual
Section 3A
Abnormal Procedures
PIM TBM 960 - Edition 0
Rev. 01
Page 3A.7.14
PIM - DO NOT USE FOR FLIGHT OPERATIONS