background image

Battery Inspection

Remove the battery cable terminal.

Check whether the battery terminal is
loosened, clean the terminal, and apply
grease onto it.

6-38

VEHICLE INSPECTION AND MAINTENANCE

Battery

OM-B239

CAUTION

Firmly fix the terminal do that it does
not fall off by the vibration of the
vehicle.

CAUTION

Do not misconnect the te)
and terminal(-) upon connection of
the battery terminals. Make sure that
removed batteries terminals are not
in contact.
The battery could be discharged if the
vehicle is not operated for a long
period. Separate the terminal(-) to
prevent the battery from discharging,
and recharge the battery by turning
on the engine about once a month.
Separating the terminal while the
engine is still running results in a
sever damage in the electronic
devices of the vehicle.
Always separate the battery terminal
after turning off the engine.
Make sure the wires are connected
properly upon battery replacement.

REFERENCE

Regular Voltage (20 ~ 24)

24~26V (Engine Stopped)
27

±

0.4V (Engine Running)

WARNING

Since gas and sulphuric acid is
included, be careful and protect
your   eyes and face.
Deal with care, since it is explosive.
Do not use inflammables such as
cigarettes and electric sparks as it
produces flammable hydrogen gas.
Make sure sulphuric acid does not
spill on you body or clothes. If it is on
your body, wash it off immediately
with clean soap water. If it was spilt
on a wounded part of your body or
your eyes, wash it off immediately
with clean water and receive care
from a hospital.

·

·

·

·

·
·

·

·
·

·

Содержание BS Series





































































































































































































































































Отзывы: