Daedong Kioti LK30, Руководство по ремонту

Страница: 309 / 326

10-23 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
B
OFF
ON
GLOW
START
L M G ST
position
terminal
M
Size/Color
AVS 3.0 RW
AVSS 1.25 BW
AVS 3.0 R
AVS 3.0 BW
ST
B
G
L
position
terminal
OFF
ON
PREHEAT
START
265WA22A
4.1 STARTING SYSTEM
4.1.1 KEY SWITCH
The key switch is located on the right side of the
operator’s console. The 4 positions of the switch are:
265WA21A
A. KEY SWITCH TESTING
Disconnect the key switch from the wiring harness
connector. Use an ohmmeter to test the switch.
• With the key in the “OFF” position, continuity will not
exist between any of the terminals, not shown.
• With the key in the “ENGINE PREHEAT” position,
there will be continuity between the (BATTERY) and
(HEAT) terminal of the switch, and (C) and (D) of the
connector.
• With the switch in the “ON” position, there will be
continuity between (BATTERY) and (ON) terminal of
the switch, and (D) and (A) of the connector.
• With the key in the “START” position, there will be
continuity between the (BATTERY) and (START) ter-
minals of the switch, and (C) and (B) of the
connector. If the test results are not as outlined
above, replace the key switch.
NOTE:
• The “START” position is spring loaded to return
to “ON” position.
4. SERVICING
A
B
D
C
M
B
ST
G
(A) Key on
(C) Battery
(B) Start
(D) Glow
ELECTRIC SYSTEM - SERVICING
Lk30_10_electric.p65
2007-07-26, ¿ÀÈÄ 12:07 Page 23
Adobe PageMaker 6.5K/Win