Daedong Kioti LK30, Руководство по ремонту

Страница: 119 / 326

2-67 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
C. VALVE STEM CLEARANCE
1. Remove the carbon from the valve guide.
2. Measure the valve stem O.D. with an outside
micrometer.
3. Measure the valve guide I.D. of cylinder head, and
calculate the clearance.
4. If the measurement exceeds the allowable limit,
replace the valve guide or the valve.
Reference value
Allowable limit
0.035 ~ 0.065 mm
0.0014 ~ 0.0026 in.
0.1 mm
0.004 in.
(A) Finishing size of inlet valve guide
(B) Finishing size of exhaust valve guide
(1) 7.010 ~ 7.025 mm 0.2760 ~ 0.2766 in.
(2) 7.010 ~ 7.025 mm 0.2760 ~ 0.2766 in.
196W2B2B
196W2B3B
196W2B4A
Item
Valve
recessing
Factory spec.
0.9 ~ 1.1 mm
0.035 ~ 0.043 in.
Allowable limit
1.3 mm
0.051 in.
D. VALVE RECESSING
1. Clean the cylinder head, the valve face and the seat.
2. Insert the valve in the guide.
3. Measure the valve recessing with a depth gauge.
4. If the recessing exceeds the allowable limit, replace
the valve and check the valve seating.
•
When changing the valve guide, be sure to ream
as the figure indicates after inserting the valve
guide.
IMPORTANT
ENGINE - SERVICING
Lk30_02_engine(41-82).p65
2007-07-26, ¿ÀÈÄ 12:04 Page 67
Adobe PageMaker 6.5K/Win