Daedong DSF75GT, Руководство пользователя

Страница: 120 / 224

7
-
1
harvest dsF75gt
7
-
1
7
-
1
harvest dsF75gt
7
-
1
When working in a wet field, inspect
the crop condition (such as an angle
of the crops) and field condition (such
as moisture content and inclination
of the surface) carefully. if any abnor-
mal condition is found, refer to the
following chart for proper action.
symptom aCtion
• the vehicle is slipping
• the crawler is stuck and cannot move
• the vehicle is leaning to one side
• keep the reaping speed low.
• never turn on the same spot.
• avoid abrupt turning. (operate the power
steering lever slowly for bigger turning
radius.)
• avoid abrupt starts.
• if the combine is caught in a drain or
puddle, reduce its weight in order to reap.
(discharge all grains from the threshing
cylinder or grain tank.)
• the reaping unit is clogged
• select the suitable reaping method ac-
cording to the crop and field conditions.
• reap severely lodged crops separately.
(especially, when reaping long crops
in the lying direction, grains may enter
and block the reaping unit before cutting
crops.)
• remove straw debris and mud. (Feeding
unit opening and conveyor)
• decrease the reaping speed.
• increase the reaping height. (adjust the
amount of reaped crops.)
working in a wet field
make sure to stop the engine
and take a proper action when
a malfunction is found.
if the vehicle body is tilted to
one side excessively, do not
allow an assistant to leave
the vehicle. Otherwise, it can
cause overturn, leading to in-
juries.
•
•
Caution
CF100(DSF75GT)_콤바인_영문판_07.indd 14 2017-07-03 오후 2:33:33