Daedong DSF75GT, Руководство пользователя

Страница: 214 / 224

10
-
TroubleshooTing DsF75gT
10
-
10
-
TroubleshooTing DsF75gT
10
-
sYMpToM Cause
inspeCTion
iTeM
soluTion
6. The no. 2 auger
is clogged.
The working speed is
too fast.
Main and range
shift levers
Adjust the working speed according to crop and field conditions.
Crops are too wet. Crop stop operation and reap crops after they are dried enough.
The auger and process-
ing teeth are worn.
Auger and pro-
cessing teeth
stop operation and replace worn parts.
7. A lot of grains
are hulled and
shattered.
Crop supply is unstable. Working speed increase the working speed slightly.
The engine speed is too
high.
Throttle lever Decrease the engine speed.
The no. 2 auger is over-
loaded.
sieve case auxil-
iary plate
stop operation, stop the engine and adjust it forward.
net
stop operation, stop the engine and replace the net with another
net that has 23.5 mm meshes.
The net is clogged or
no. 2 auger is gradually
overloaded.
net stop operation temporarily, stop the engine and clean it.
stop operation temporarily, stop the engine and adjust the chaff
control lever to the Close position.
net
The no. 1 horizontal/
vertical auger clean-out
is clogged with foreign
material such as mud.
no. 1 vertical/
horizontal auger
clean-out
stop operation temporarily, stop the engine and clean it.
8. The sieve case
overflows.
The working speed is
too fast.
Main and range
shift levers
Set the working speed according to crop and field conditions.
Crops are too wet. Crop
stop operation and reap crops after they are dried enough.
stop operation and reap crops after it is ripe enough.
CF100(DSF75GT)_콤바인_영문판_10.indd 8 2017-06-27 오후 6:42:49