Dacor RV30, Руководство по установке

Страница: 7 / 20

5
The raised vent exhaust may be configured to vent •
through the bottom or through one of the sides. Allow
room for the exhaust duct coming out of the unit.
See Planning the Duct Work (page 7) for additional
details.
The maximum allowable duct run must be taken
•
into consideration when determining the layout. See
Planning the Duct Work for further details.
Access from the front of the cabinet to the underside of •
the cooktop, the vent system and the electrical and gas
supplies for the cooktop and vent must be provided for
inspection and service. Any drawers or shelves placed
below the cooktop and in front of the vent must be easy
to remove for access to the cooktop, vent and utilities.
For installation with gas cooktops, a 90-degree elbow
•
must be connected to the cooktop gas inlet (see dia-
gram at right) to avoid interference with the raised
vent’s front panel.
Installation Specifications
Example of Gas Line Routing for Gas Cooktop
Installations - Side View
Example of Layout with
Cabinet Blower, Exhaust Through wall
90
°
elbow
Gas line with
regulator
attached
Raised vent with
cabinet blower
mounted to front
Cabinet blower
Cabinet blower
3 1/4” X 10”
90
° elbow
Wall cap
Wall
Cooktop
Raised vent
Backsplash
Duct directly through rear
wall to wall cap
12” Min.
(305 mm)
Floor
Example of Layout with
Remote Blower, Roof Exhaust
REMP16 series
remote blower
Floor
Wall board
Cooktop
Raised vent
configured for
bottom exhaust
Backsplash
Duct work
between raised
vent and remote
blower
Wiring/conduit that supplies power
to remote blower (see Electrical
Installation , page 10)
3 1/4” X 10”
to 10” round
transition and
45 °
adjustable elbow