D-Link xStack DWS-3200 Series, Руководство CLI

Страница: 484 / 581

DXS/DWS-3200 series CLI Reference Guide
Page 481
Section 33. Wireless AP General Commands
clear wlan ap
The clear wlan ap Privileged EXEC mode command deactivates an AP.
Syntax
clear wlan ap { name | mac-address }
Parameters
•
name — The AP name. (Range: 1-32 characters)
•
mac-address — The AP MAC address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
•
When the configurations of all the deactivated AP is deleted, the AP may reappear in the AP Discovery Table.
•
The clear wlan ap command can also be used to remove an AP that is irrelevant (either associated with
another device or removed from the system) from the APs discovery table. If the AP is still relevant (not
associated with another device and not removed from the system), it should not be removed from the
discovery table.
Example
The following example deactivates an AP called enterprise.
Console (config)# clear wlan ap enterprise