D-Link xStack DWS-3200 Series, Руководство CLI

Страница: 223 / 581

QoS Commands
policy-map
Page 220
policy-map
The policy-map Global Configuration mode command creates a policy map and enters the Policy-map
Configuration mode. To delete a policy map, use the no form of this command.
Syntax
policy-map policy-map-name
no policy-map policy-map-name
Parameters
•
policy-map-name — Specifies the name of the policy map (Range: 0-32 characters).
Command Mode
Global Configuration mode
User Guidelines
Before configuring policies for classes whose match criteria are defined in a class map, use the policy-map
Global Configuration mode command to specify the name of the policy map to be created or modified.
Class policies in a policy map can only be defined if match criteria has already been defined for the classes. Use
the
class-map Global Configuration and match Class-map Configuration commands to define the match criteria
of a class.
Only one policy map per interface per direction is supported. A policy map can be applied to multiple interfaces
and directions.
Example
The following example creates a policy map called ‘policy1’ and enters the Policy-map Configuration mode.
Console (config)# policy-map policy1
Console (config-pmap)#