manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Руководство CLI

Серия D-Link xStack DWS-3200 - это надежные коммутаторы управления, предназначенные для повышения производительности сети. Для получения подробной информации о настройках и использовании устройства, скачайте бесплатное Руководство пользователя Cli Manual с нашего сайта.

Поделиться
Скачать
background image

DXS/DWS-3200 series CLI Reference Guide

Page 17 

Interface Configuration and Specific Configuration Modes

Interface Configuration mode commands modify specific interface operations. The following are the Interface 
Configuration modes:

•

Line Interface

 — Contains commands to configure the management connections. These include commands 

such as line timeout settings, etc. The 

line

 Global Configuration mode command is used to enter the Line 

Configuration command mode.

•

VLAN Database

 — Contains commands to create a VLAN as a whole. The 

vlan database 

Global 

Configuration mode command is used to enter the VLAN Database Interface Configuration mode.

•

Management Access List

 — Contains commands to define management access-lists. The 

management 

access-list 

Global Configuration mode command is used to enter the Management Access List Configuration 

mode.

•

Ethernet

 — Contains commands to manage port configuration. The 

interface ethernet

 Global Configuration 

mode command is used to enter

 

the Interface Configuration mode to configure an Ethernet type interface.

•

Port Channel

 — Contains commands to configure port-channels, for example, assigning ports to a port-

channel. Most of these commands are the same as the commands in the Ethernet interface mode, and are 
used to manage the member ports as a single entity. The 

interface port-channel 

Global Configuration mode 

command is used to enter the Port Channel Interface Configuration mode.

•

SSH Public Key-chain

 — Contains commands to manually specify other device SSH public keys. The 

crypto key pubkey-chain ssh 

Global Configuration mode command is used to enter the SSH Public Key-

chain Configuration mode.

•

QoS — 

Contains commands related to service definitions. The 

qos 

Global Configuration mode command

 

is 

used to enter the QoS services configuration mode.

•

MAC Access-List 

—

 

Configures conditions required to allow traffic based on MAC addresses. The 

mac 

access-list

 Global Configuration mode command is used to enter the MAC access-list configuration mode.

Starting the CLI

The device can be managed over a direct connection to the device console port or via a Telnet connection. The 
device is managed by entering command keywords and parameters at the prompt. Using the device command-
line interface (CLI) is very similar to entering commands on a UNIX system.

If access is via a Telnet connection, ensure that the device has a defined IP address, corresponding management 
access is granted, and the workstation used to access the device is connected to the device prior to using CLI 
commands.

Note

The following steps are for use on the console line only.

To start using the CLI, perform the following steps:

1.

Connect the DB9 null-modem or crossover cable to the RS-232 serial port of the device to the RS-232 serial 
port of the terminal or computer running the terminal emulation application.

a) Set the data format to 8 data bits, 1 stop bit, and no parity.

b) Set Flow Control to 

none

.

c) Under 

Properties

, select 

VT100 for Emulation 

mode.

d) Select 

Terminal keys

 

for 

Function, Arrow, and Ctrl keys

. Ensure that the setting is for 

Terminal keys

(not

 

Windows keys

).

Содержание xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DWS-3200 Series

Cabletron Systems SmartSwitch 6500 Installation And Setup Manual preview
SmartSwitch 6500
Бренд: Cabletron Systems Страницы: 62
3Com 4210G Series Configuration Manual preview
4210G Series
Бренд: 3Com Страницы: 1133
Techroutes S3756 Hardware Installation Manual preview
S3756
Бренд: Techroutes Страницы: 22
Adler ASM512 Installation, Maintenance And Operating Manual Instruction preview
ASM512
Бренд: Adler Страницы: 8
Dell EMC PowerSwitch Z9332F-ON Setup Manual preview
PowerSwitch Z9332F-ON
Бренд: Dell EMC Страницы: 16
Edge-Core AS7326-56X Quick Start Manual preview
AS7326-56X
Бренд: Edge-Core Страницы: 9
Key Digital KD-MS4x4G-2 Manual preview
KD-MS4x4G-2
Бренд: Key Digital Страницы: 20
Crestron CLW-SW1/4RF Operation Manual preview
CLW-SW1/4RF
Бренд: Crestron Страницы: 36
Wyrestorm MX-0404-H2 Quick Start Manual preview
MX-0404-H2
Бренд: Wyrestorm Страницы: 4
Kathrein EXE 1512 Manual preview
EXE 1512
Бренд: Kathrein Страницы: 41
Enterasys Vertical Horizon VH-2402-L3 Management Manual preview
Vertical Horizon VH-2402-L3
Бренд: Enterasys Страницы: 201
Pilz PSEN ma2.1p/ATEX Operating Instructions Manual preview
PSEN ma2.1p/ATEX
Бренд: Pilz Страницы: 8
Kramer VS-28 User Manual preview
VS-28
Бренд: Kramer Страницы: 10
Gefen EXT-DVIK-MV-441 User Manual preview
EXT-DVIK-MV-441
Бренд: Gefen Страницы: 136
AVPro Edge ConferX AC-CX84-AUHD Quick Start Manual preview
ConferX AC-CX84-AUHD
Бренд: AVPro Edge Страницы: 6
DigitaLinx DL-A31 Installation Manual preview
DL-A31
Бренд: DigitaLinx Страницы: 4
Dali OBERON C SOUND HUB COMPACT Manual preview
OBERON C SOUND HUB COMPACT
Бренд: Dali Страницы: 3
Panio CH8810K User Manual preview
CH8810K
Бренд: Panio Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды