D-Link xStack DGS-3612G series, Инструкция по эксплуатации, Страница: 317 / 326

xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DGS-3612G:4#
reconfig
Used to connect to a member switch, through the commander switch,
using telnet.
Syntax reconfig {member_id <value 1-32 | exit}
Description This command is used to reconnect to a member switch using Telnet.
member_id <value 1-32> - Select the ID number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Restrictions Only administrator-level users can issue this command.
Purpose
Parameters
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
DGS-3612G:4#reconfig member_id 2
DGS-3612G:4#
Command: reconfig member_id 2
Login:
config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax config sim [add <candidate_id 1-100> {<password>} | delete
<member_id 1-32>]
Description This command is used to add candidates and delete members from
the SIM group by ID number.
Parameters add <candidate_id 1-100> <password> - Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a member:
314