xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Example:
To disable SNTP support:
DGS-3612G:4#disable sntp
Command: disable sntp
Success.
DGS-3612G:4#
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time <date ddmthyyyy> <time hh:mm:ss>
Description
This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters
date
– Express the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the
month, and four numerical characters for the year. For example:
03aug2003.
time
– Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Restrictions Only
administrator-level
users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
Example usage:
To manually set system time and date settings:
DGS-3612G:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3612G:4#
config time_zone
Purpose
Used to determine the time zone used in order to adjust the system
clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min
<minute 0-59>}
Description
This will adjust system clock settings according to the time zone.
Time zone settings will adjust SNTP information accordingly.
Parameters
operator
– Choose to add (+) or subtract (-) time to adjust for time
zone relative to GMT.
hour
– Select the number of hours different from GMT.
min
– Select the number of minutes difference added or subtracted
to adjust the time zone.
Restrictions Only
administrator-level users can issue this command.
Example usage:
197
