manualshive.com logo in svg

D-Link xStack DGS-3612G series, Инструкция по эксплуатации

Серия коммутаторов D-Link xStack DGS-3612G предлагает решения для средних и крупных предприятий. Пользователи могут скачать бесплатный CLI Manual для этого продукта на сайте manualshive.com, чтобы получить подробные инструкции по настройке и использованию.

Поделиться
Скачать
background image

xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

44 

A

CCESS 

A

UTHENTICATION 

C

ONTROL 

C

OMMANDS

 

The TACACS / XTACACS /  / RADIUS commands allow users to secure access to the Switch using the TACACS / 
XTACACS /  / RADIUS protocols. When a user logs in to the Switch or tries to access the administrator level privilege, 
he or she is prompted for a password. If TACACS / XTACACS /  / RADIUS authentication is enabled on the Switch, it 
will contact a TACACS / XTACACS /  / RADIUS server to verify the user. If the user is verified, he or she is granted 
access to the Switch. 

There are currently three versions of the TACACS security protocol, each a separate entity. The Switch’s software supports the 
following versions of TACACS: 

•

 TACACS (Terminal Access Controller Access Control System) —Provides password checking and authentication, and 

notification of user actions for security purposes utilizing via one or more centralized TACACS servers, utilizing the UDP protocol 
for packet transmission. 

•

 Extended TACACS (XTACACS) — An extension of the TACACS protocol with the ability to provide more types of 

authentication requests and more types of response codes than TACACS. This protocol also uses UDP to transmit packets. 

•

  (Terminal Access Controller Access Control System plus) — Provides detailed access control for 

authentication for network devices.  is facilitated through Authentication commands via one or more centralized servers. 
The protocol encrypts all traffic between the Switch and the  daemon, using the TCP protocol to ensure 
reliable delivery. 

The Switch also supports the RADIUS protocol for authentication using the Access Authentication Control commands. RADIUS or 
Remote Authentication Dial In User Server also uses a remote server for authentication and can be responsible for receiving user 
connection requests, authenticating the user and returning all configuration information necessary for the client to deliver service 
through the user. RADIUS may be facilitated on this Switch using the commands listed in this section. 

In order for the TACACS / XTACACS /  / RADIUS security function to work properly, a TACACS / XTACACS / 
 / RADIUS server must be configured on a device other than the Switch, called a 

server host

 and it must include 

usernames and passwords for authentication. When the user is prompted by the Switch to enter usernames and passwords for 
authentication, the Switch contacts the TACACS / XTACACS / / RADIUS server to verify, and the server will respond 
with one of three messages: 

A)  The server verifies the username and password, and the user is granted normal user privileges on the Switch.  

B)  The server will not accept the username and password and the user is denied access to the Switch. 

C)  The server doesn’t respond to the verification query. At this point, the Switch receives the timeout from the server and then 

moves to the next method of verification configured in the method list. 

The Switch has four built-in 

server groups

, one for each of the TACACS, XTACACS,  and RADIUS protocols. These 

built-in 

server groups

 are used to authenticate users trying to access the Switch. The users will set 

server hosts

 in a preferable order in 

the built-in 

server

 

group

 and when a user tries to gain access to the Switch, the Switch will ask the first 

server host

 for authentication. 

If no authentication is made, the second 

server host

 in the list will be queried, and so on. The built-in 

server group

 can only have 

hosts that are running the specified protocol. For example, the TACACS 

server group

 can only have TACACS 

server hosts

. 

The administrator for the Switch may set up five different authentication techniques per user-defined 

method list

 (TACACS / 

XTACACS /  / RADIUS / local / none) for authentication. These techniques will be listed in an order preferable, and 
defined by the user for normal user authentication on the Switch, and may contain up to eight authentication techniques. When a user 
attempts to access the Switch, the Switch will select the first technique listed for authentication. If the first technique goes through its 

server hosts 

and no authentication is returned, the Switch will then go to the next technique listed in the server group for 

authentication, until the authentication has been verified or denied, or the list is exhausted. 

Please note that user granted access to the Switch will be granted normal user privileges on the Switch. To gain access to admin level 
privileges, the user must enter the 

enable admin

 

command and then enter a password, which was previously configured by the 

administrator of the Switch. 

 

 

NOTE:

 TACACS, XTACACS and are separate entities and are not 

compatible. The Switch and the server must be configured exactly the same, using the 
same protocol. (For example, if the Switch is set up for TACACS authentication, so 
must be the host server.) 

 

 

 

 

275

Содержание xStack DGS-3612G series







































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3612G series

D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Бренд: D-Link Страницы: 17
Idis DR-8416 Operation Manual preview
DR-8416
Бренд: Idis Страницы: 123
Idis DR-6232H Installation Manual preview
DR-6232H
Бренд: Idis Страницы: 29
Idis DR-4516P Installation Manual preview
DR-4516P
Бренд: Idis Страницы: 28
Idis DirectIP DR-1304P Operation Manual preview
DirectIP DR-1304P
Бренд: Idis Страницы: 82
iDirect Evolution X1 Installation Manual preview
Evolution X1
Бренд: iDirect Страницы: 130
Qlogic SANbox 6142 Supplementary Manual preview
SANbox 6142
Бренд: Qlogic Страницы: 2
Qlogic iSR6142 User Manual preview
iSR6142
Бренд: Qlogic Страницы: 172
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Бренд: OCCITALINA Страницы: 54
NEC P401-TMX4D User Manual preview
P401-TMX4D
Бренд: NEC Страницы: 2
4G Systems XSBox MOVE Quick Start Manual preview
XSBox MOVE
Бренд: 4G Systems Страницы: 2
IDT Tsi310TM User Manual preview
Tsi310TM
Бренд: IDT Страницы: 207
Comway 4G DTU Configuration Instructions preview
4G DTU
Бренд: Comway Страницы: 20
TP-Link Archer C7 How To Set Up preview
Archer C7
Бренд: TP-Link Страницы: 4
3Com NETBuilder SI Using Manual preview
NETBuilder SI
Бренд: 3Com Страницы: 212
Multiplex MULTIflight Stick Operating Instructions Manual preview
MULTIflight Stick
Бренд: Multiplex Страницы: 10
AMCI RBE2-8 User Manual preview
RBE2-8
Бренд: AMCI Страницы: 55
Multitech FaxFinder FF-120 Administrator User Manual preview
FaxFinder FF-120
Бренд: Multitech Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды