xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete limited multicast address
Purpose
Used to delete Limited IP multicast address range.
Syntax
delete limited multicast address [all | <portlist>]
Description The
delete limited multicast address
command allows the user to
delete all multicast address ranges or a selected range based on
what port or ports the range has been assigned to.
Parameters
all -
Allows the user to delete all limited multicast addresses that
have been configured on the Switch.
<portlist> -
Allows the user to delete only those multicast address
ranges that have been assigned to a particular port or range of ports.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete the limited multicast address on ports 1-3:
DGS-3612G:4#delete limited multicast address 1-3
Command: delete limited multicast address 1-3
Success.
DGS-3612G:4#
show limited multicast address
Purpose
Used to show per-port limited IP multicast address range.
Syntax
show limited multicast address {<portlist>}
Description The
show limited multicast address
command allows users to
show multicast address range by ports.
Parameters
<portlist>
A port or range of ports on which the limited multicast
address range to be shown has been assigned.
Restrictions None.
Example usage:
To show the limited multicast address on ports 1-3:
1 224.1.1.1 224.1.1.2 permit enable
DGS-3612G:4#show limited multicast address 1-3
Command: show limited multicast address 1-3
Port From To Access Status
---- -------------- --------------- -------- -------
2 224.1.1.1 224.1.1.2 permit enable
3 224.1.1.1 224.1.1.2 permit enable
DGS-3612G:4#
159
