D-Link DWC-1000 Скачать руководство пользователя страница 310

Страница: 310 / 390

D-Link DWC-1000 User Manual

310

Section 8 - Viewing Status and Statistics

Path: Status > Wireless Information > Access Point > Authentication Failed

An access point might fail to associate to the wireless controller due to errors such as invalid packet format

or vendor ID, or because the access point is not configured as a valid access point with the correct local or

RADIUS authentication information. The Authentication Failed APs List page shows information about access

points that failed to establish communication with the wireless controller. Right-click on an AP to bring up

options to manage, or to view details.

Authentication Failed

Failure

Description

No Database Entry

MAC address of the access point is not in the local Valid AP database or the

external RADIUS server database, so the access point has not been validated.

Local Authorization

Authentication password configured in the access point did not match the

password configured in the local database.

Not Managed

Access point is in the Valid AP database, but the access point Mode in the local

database is not set to Managed.

RADIUS Authentication

The password configured in the RADIUS client for the RADIUS server was

rejected by the server.

RADIUS Challenged

The RADIUS server is configured to use the Challenge-Response authentication

mode, which is incompatible with the access point.

RADIUS Unreachable

The RADIUS server that the access point is configured to use is unreachable.

Invalid RADIUS Response

The access point received a response packet from the RADIUS server that was

not recognized or invalid.

Invalid Profile ID

The profile ID specified in the RADIUS database may not exist on the controller.

This can also happen with the local database when the configuration has

been received from a peer controller.

Profile Mismatch

Hardware Type: The access point hardware type specified in the access point

Profile is not compatible with the actual access point hardware.

An access point can fail due to any of the reasons:

Содержание DWC-1000







































































































































































































































































































































































































Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды

D-Link DWC-1000, Руководство пользователя

Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды