D-Link DWC-1000 Скачать руководство пользователя страница 326

Страница: 326 / 390

D-Link DWC-1000 User Manual

326

Section 8 - Viewing Status and Statistics

Viewing WDS Group Status

Path: Status > Wireless Information > WDS Groups Status > WDS Groups Status

The Wireless Distribution System (WDS)-Managed AP feature allows you to add managed APs to the cluster

using over-the-air WDS links through other managed APs. With WDS, APs may be located outdoors where wired

connection to the data network is unavailable, or in remote buildings that are not connected to the main campus

with a wired network.

The WDS AP group consists of the following managed APs:

• Root AP:

Acts as a bridge or repeater on the wireless medium and communicates with the controller

via the wired link

• Satellite AP:

Communicates with the controller via a WDS link to the Root AP

The WDS links are secured using WPA2 Personal authentication and AES encryption.

This page displays summary information about configured WDS links. At least one group must be configured for

the fields to display. To configure a WDS AP group, use the pages from Wireless > Access Point > WDS Groups.

Field

Description

Unique number that identifies the WDS AP group.

Configured AP Count

Number of APs configured in this WDS AP group.

Connected Root AP

Number of Root APs currently being managed by the controller that are

members of this WDS AP Group.

Connected Satellite AP

Number of Satellite APs currently being managed by the controller that are

members of this WDS AP Group.

Configured WDS Link Count

Number of configured bidirectional links in the WDS AP Group.

Detected WDS Links Count

Number of WDS links detected in the system.APs on both sides of the link

must detect each other in order for the link to be counted.

Содержание DWC-1000







































































































































































































































































































































































































Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды

D-Link DWC-1000, Руководство пользователя

Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды