D-Link DWC-1000 User Manual
230
Section 6 - Securing Your Network
Email Configuration
Path: Security > Authentication > Email Configuration
Using this feature of email configuration, the user is allowed to configure the SMTP server to email the captive
portal user credentials from the controller.
To configure:
1. Go to
Security
>
Authentication
>
Email Configuration
.
2. Fill-in the fields shown in the table below.
Field
Description
E-mail Server Address
Enter the IP address or Internet Name of an SMTP server. The controller will connect
to this server to send captive portal user credentials.
SMTP Port
Enter the SMTP port of the e-mail server.
Return E-mail address
Type the e-mail address where the replies from the SMTP server are to be sent
(required for failure messages).
Authentication with SMTP
If the SMTP server requires authentication before accepting connections, select
either
Login Plain
or
CRAM-MD5
and enter the User Name and Password to be used
for authentication. To disable authentication, select
None
.
Respond to Identd from SMTP
Toggle it ON to configure the controller to respond to an IDENT request from the
SMTP server.
Save
Saves the settings.
