D-Link DWC-1000 Скачать руководство пользователя страница 134

Страница: 134 / 390

D-Link DWC-1000 User Manual

134

Section 4 - Advanced WLAN Configuration

AP Firmware Status

Status (per-AP)

A table also appears and lists each AP, its download status, and the software version it

is downloading. The status for an individual AP can have one of the following values:

• Requested: A download is planned for this AP, but the AP is not in the current

download group, so it hasn’t been told to start the download yet.

• Code‐Transfer‐In‐Progress: The AP has been told to download the code.

• Failure: The AP reported a failing code download.

• Aborted: The download was aborted before the AP loaded code from the TFTP

server.

• Waiting‐For‐APs‐To‐Download: A download finished on this AP, and it is waiting for

other APs to finish download. Reset command is not sent to the AP in this state.

• NVRAM‐Update‐In‐Progress: Download completed successfully. The reset

command sent to the AP.

• Timed‐Out: The AP did not reconnect to the controller in the fixed time interval.

AP MAC

The managed AP MAC address.

Location

The location of the managed AP.

Status

Refer to Status (per-AP) above.

Firmware Version

The current firmware version of the managed AP.

Содержание DWC-1000







































































































































































































































































































































































































Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды

D-Link DWC-1000, Руководство пользователя

Результаты поиска

Содержание DWC-1000

Отзывы:

Похожие инструкции для DWC-1000

Бренды по названию

Популярные бренды