D-Link DSL-2540T Скачать руководство пользователя страница 37

Страница: 37 / 112

DSL-2540T ADSL Router User Guide

Dynamic IP Parameters

Description

PVC

The Router supports using up to eight multiple virtual connections. This

window allows the user to configure WAN settings for all the available
connections (see instructions below on how to set up Multiple Virtual

Connections). Use the PVC drop-down menu to select the connection (

Pvc0

Pvc7) you want to configure. Since most users will use only a single

connection, the default setting

Pvc0 can be used for any changes made to

the WAN settings.

VPI

The Virtual Path Identifier is used with the VCI to define a dedicated circuit
on the ATM network portion of the connection to the Internet and WAN.

Most users will not need to change this setting.

VCI

The Virtual Channel Identifier is used with the VPI to define a dedicated

circuit on the ATM network portion of the connection to the Internet and

WAN. Most users will not need to change this setting.

Virtual Circuit

As with the PVC setting, this is mainly for use by clients who are
configuring the Router for multiple virtual connections. Use this to enable

or disable the PVC you are currently configuring. By default, the Pvc0 is

Enabled and the remaining PVCs are disabled.

WAN Setting

Use the drop-down menu to select

Dynamic IP Address. The remaining

options are

Bridge Mode, Static IP Address, and PPPoE/PPPoA.

Connection Type

This specifies the connection type and encapsulation method used for your
Dynamic IP Address connection. The options available are

1483 Bridged IP

LLC or 1483 Bridged IP VC-Mux.

Cloned MAC Address

This is not always necessary, but may be required for some ISPs. Type in

the MAC address of your computer’s Ethernet adapter in the Cloned MAC

Address field and click the Clone MAC Address button. This will copy the

information to a file used by the Router to present to the ISP’s server used

for DHCP. Some ISPs record the unique MAC address of your computer’s

Ethernet adapter when you first access their network. If you want to later
replace the cloned MAC address with the factory default setting, type in all

zeros - 0:0:0:0:0:0 - and click the Clone MAC Address button.

Cloned MAC Address

To clone the MAC address of your computer’s Ethernet adapter, type in the

MAC address in the Cloned MAC Address field and then click this Clone

MAC Address button.

MTU

The Maximum Transmission Unit size may be changed if you want to

optimize efficiency for uploading data through the WAN interface. The

default setting (1400 bytes) should be suitable for most users. Some user

may want to adjust the setting to optimize performance for wireless traffic

or when low latency is desired (such as with Internet gaming). It is highly
recommended that the user research how adjusting the MTU may affect

network traffic for better or worse.

PPPoE PassThrough

This feature enables the Router to allow a “dial-up” or separate bridged PPP

connection to an individual PC. In this instance the Router will serve as a

bridge.

NAT

Network Address Translation may be enabled or disabled with the pull-

down menu. Keep in mind that disabling NAT allows only a single computer

to be used for Internet access through the Router. NAT is enabled and

Содержание DSL-2540T

















































































































Результаты поиска

Содержание DSL-2540T

Отзывы:

Похожие инструкции для DSL-2540T

Бренды по названию

Популярные бренды

D-Link DSL-2540T, Руководство пользователя

Результаты поиска

Содержание DSL-2540T

Отзывы:

Похожие инструкции для DSL-2540T

Бренды по названию

Популярные бренды