background image

DSL-2540T ADSL Router User Guide

 

 

8

Access the Configuration Manager 

In order to make sure your computer’s IP settings allow it to communicate with the Router, it is advisable to configure 
your system be a DHCP client – that is, it will get IP settings from the Router. Appendix B describes how to configure 
different Windows operating systems to “Obtain IP settings automatically”. 

 

Note

 

Be sure that the web browser on your computer is not configured to use a proxy server in the 
Internet settings. In Windows Internet Explorer, you can check if a proxy server is enabled using the 
following procedure: 

1. In Windows, click on the 

Start

 button and choose 

Control Panel

2. In the 

Control Panel

 window, click on the 

Network and

 

Internet Options

 icon. 

3. In the 

Network and Internet Connections 

window, click the 

Internet Options

 icon. 

4. In the 

Internet Properties

 window, click on the 

Connections

 tab and click on the 

LAN Settings

 

button 

5. Verify that the “Use a proxy server for your LAN (These settings will not apply to dial-up or VPN 

connections).” option is NOT checked. If it is checked, click in the checked box to deselect the 
option and click 

OK

Alternatively, you can access this Internet Options menu using the Tools pull-down menu in 
Internet Explorer.

 

Login to Home Page 

To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router. 
Type in 

http://

 followed by the default IP address, 

192.168.1.1 

in the address

 

bar of the browser. The URL in the 

address bar should read: 

http://192.168.1.1

A dialog box prompts for the User Name and Password. Type in the default User Name “admin,” and the default 
Password “admin” then click the 

OK

 button to access the web-based manager. 

 

Enter Password 

You should change the web-based manager access user name and password once you have verified that a connection 
can be established. The user name and password allows any PC within the same subnet as the Router to access the web-
based manger. 

 

Note

 

The user name and password used to access the web-based manager is NOT the same as the 
ADSL account user name and password needed for PPPoE/PPPoA connections to access the 
Internet. 

Содержание DSL-2540T

















































































































Отзывы: