DSL-2540T ADSL Router User Guide
34
To configure a Static IP type connection for the WAN, follow these steps:
1.
Choose the
Static IP Address
option from the
WAN Settings
pull-down menu.
2.
Under the
ATM VC Settings
at the top of the window should not be changed unless you have been instructed to
change them. However, if you are instructed to change the
VPI
or
VCI
values, type in the values assigned for
your account. Leave the
PVC
and
Virtual Circuit
setting at the default (
Pcv0
and
Enabled
) values for now. This
can be used later if you are configuring multiple virtual circuits for your ADSL service. For more information on
ATM VC Settings, see the table on page 39 below.
3.
Under the
Static IP
heading, choose the
Connection Type
from the pull-down menu. This defines both the
connection type and encapsulation method used for your ADSL service. The available options are
Bridged IP
LLC
,
Bridged IP VC-Mux
,
Routed IP LLC
,
Routed IP VC-Mux
or
IPoA
. If have not been provided specific
information for the Connection Type setting, leave the default setting.
4.
Change the
IP Address
,
Subnet Mask
,
Gateway Address
and (if available)
Secondary DNS
Server IP address
as instructed by your ISP. These are the global IP settings for the WAN interface. This is the “visible” IP address
of your account. Your ISP should have provided these IP settings to you. For IPoA (Classic IP over ATM)
connections you may need to type in an additional IP address for a
ARP Server Address
. If you are using an
IPoA connection, ask your ISP if it is necessary to use an ARP (Address Resolution Protocol) server.
5.
Leave the
MTU
value at the default setting (default =
1400
) unless you have specific reasons to change this (see
table below).
6.
Enable
PPPoE PassThrough
if you want the Router to allow a “dial-up” or separate bridged PPP connection to
an individual PC.
7.
NAT
should remain
Enabled
. If you disable NAT, you will not be able to use more than one computer for
Internet connections. NAT is enabled and disabled system-wide, therefore if you are using multiple virtual
connections, NAT will be disabled on all connections.
8.
The
Firewall
should remain enabled for most users. If you choose to disable this you will not be able to use the
features configured in the
Firewall Configuration
and
Filters
window located in the
Advanced
directory. See
the next chapter for more details on these windows.
9.
Point-to-Point Tunneling Protocol is a pass-through mechanism that allows packets to pass through the Router so
that it effectively functions as a bridge. Check
Enable
PPTP
and enter the required information in the
ServerIP/Name
,
Route Target
,
Route Mask
,
PPTP Account
,
PPTP Password
, and
MPPE Encryption
fields.
10.
Most users will not need to change
ATM
settings. If this is the first time you are setting up the ADSL connection
it is recommended that you leave the
Service Category
settings at the default values until you have established
the connection. See the table on page 37 for a description of the parameters available for ATM traffic shaping.
11.
When you are satisfied that all the WAN settings are configured correctly, click on the
Apply
button.
12.
The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and
reboot the Router, click on the
Tools
directory tab and then click the
System
button. In the
System Settings
window, click the
Save and
Reboot
button under Save Settings and Reboot the System.
13.
Click
OK
when the following “Save and restart?” dialog box opens.
Содержание DSL-2540T
