107
D-Link DIR-895L User Manual
Section 4 - Configuration - Extender Mode
Smart Connect
Smart Connect:
When Smart Connect is enabled, the router automatically assigns
devices to the ideal wireless network to improve performance.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode:
Choose
None
,
WEP
, or
WPA/WPA2-Personal
(recommended).
Transmission
Power:
Select the desired wireless transmission power.
Schedule:
Use the drop-down menu to select a schedule to apply. The schedule
may be set to
Always Enable
, or you can create your own schedules
in the
Schedules
section. Refer to
for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.
WPS-PBC Status:
Enable or disable WPS-PBC fuctionality.
WPS-PIN Status:
Enable or disable WPS-PIN functionality.
Refer to the next page if you wish to disable Smart Connect or click
Save
when you are done.
Wireless
DIR-895L HW:A1
FW:1.12
Settings >> Wireless
Wireless
Use this section to configure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
Smart Connect
Smart Connect:
Enabled
Wi-Fi Name (SSID):
Your_Wi-Fi_Network
Password:
A_Str0nG_P@ssW0rd!%!
Advanced Settings ...
Save
Settings
Home
Management
Wi-Fi Protected Setup
WPS-PBC Status:
Enabled
WPS-PIN Status:
Locked
Security Mode:
WPA/WPA2-Personal
⌵
Transmission Power:
High
⌵
Schedule:
Always Enable
⌵