34
D-Link DIR-895L User Manual
Section 3 - Installation - Media Bridge
DIR-895L
DIR-895L HW:A1
FW:1.12
Existing Network
DIR-895L
Connected Clients:
1
USB Device
Internet Connected
Click on any item in the diagram for more information.
Settings
Management
Home
COPYRIGHT © 2016 D-Link
Wi-Fi
Status:
Enabled
Wi-Fi Name (SSID):
dlink-DIR-895L
Password:
A_Str0nG_P@ssW0rd!%!
IPv4 Network
MAC Address:
FF:FF:FF:FF:FF:FF
Router IP Address:
192.168.0.1
Subnet Mask:
255.255.255.0
IPv6 Network
Link-Local Address:
FF00::FF00:FF00:FF00:FF00
Router IPv6 Address:
2001:B021:23:10::1/64
DHCP-PD:
Disabled
Go to settings
Go to settings
Select
Media Bridge
from
Existing Network
.
You may either manually enter the SSID of the wireless network you would like
to connect to or click the
Scan
button to search for available nearby networks.
Select the type of security the uplink network uses. Only
None
and
WPA/WPA2-
Personal
are supported.
Enter the password for the uplink network and click Save. Allow approximately
one minute for the device to reboot.
Congratulations, your device has been successfully configured. You may now
connect additional wired devices to your DIR-895L.
The Home Page will open, click the
Settings
menu and select
Extender
.
Hardware Setup (continued)
Rebooting
60 Sec
Existing Network:
Ethernet
⌵
Ethernet
Media Bridge
DIR-895L HW:A1
FW:1.12
Settings >> Extender
Save
Extender
Use this section to configure the wireless settings for your D-Link Router. Please ensure you press Save
after any changes made in this section it to take effect.
Settings
Home
Management
Existing Network
Existing Network:
Media Bridge
⌵
Wi-Fi Name (SSID):
Your_Wi-Fi_Network
Scan
Security:
A_Str0nG_P@ssW0rd!%!