42
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
Static IP
Select
Static IP
if your IP information is provided by your Internet Service Provider (ISP).
DIR-895L HW:A1
FW:1.12
Settings >> Internet
Settings
Home
Features
Management
IPv6
Save
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS Server:
Advanced Settings ...
My Internet Connection is:
Static IP
⌵
Secondary DNS Server:
MTU:
Auto
⌵
Mac Address Clone:
<< MAC Address
⌵
VLAN:
Disabled
COPYRIGHT © 2016 D-Link
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask provided by your ISP.
Default Gateway:
Enter the default gateway address provided by your ISP.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Advanced Settings
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can use the drop-down menu to
replace the Internet port’s MAC address with the MAC address of a
connected client.
VLAN:
For more information on enabling the VLAN feature, refer to
Click
Save
when you are done.
My Internet
Connection Is:
Static IP
