43
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
PPPoE
Address Mode:
Dynamic IP
⌵
Service Name:
Primary DNS Server:
Secondary DNS Server:
MTU:
Auto
⌵
Mac Address Clone:
<< MAC Address
⌵
VLAN:
Disabled
COPYRIGHT © 2016 D-Link
DIR-895L HW:A1
FW:1.12
Settings >> Internet
Settings
Home
Features
Management
IPv6
Save
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
My Internet Connection is:
PPPoE
⌵
Advanced Settings ...
Username:
Password:
Reconnect Mode:
On demand
⌵
Maximum Idle Time:
5
minutes
COPYRIGHT © 2016 D-Link
Select
PPPoE
if your ISP provides and requires you to enter a PPPoE username and password
in order to connect to the Internet.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either
Always-on
,
On-Demand
, or
Manual
.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Advanced Settings
Address Mode:
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Dynamic IP
Service Name:
Enter the ISP service name (optional).
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is
Auto
.
My Internet
Connection Is:
PPPoE
