86
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
Status
Name
Local IP
Protocol
External Port
Internal Port
Edit
Delete
DIR-895L HW:A1
FW:1.12
Features >> Virtual Server
Virtual Server
Your router helps share a single IP address assigned by your Internet service provider among several clients
in your home. Virtual servers are preset port mappings for popular services, like a web or e-mail server, that
route traffic to a specified client inside.
Settings
Features
Home
Management
Port Forwarding
Save
Remaining: 24
Add Rule
COPYRIGHT © 2016 D-Link
Virtual Server
In some cases you may have two applications running on different devices which require
the same public port. Virtual server allows you to remap a different external port to each
device. To configure the virtual server, from the Port Forwarding page click
Virtual Server
.
To return to the main Port Forwarding page, click
Port Forwarding
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the
Add Rules
button. Click
Save
when you are done. If you edit or create a rule, the
following options will appear:
Create New User
Name:
Enter a name for the rule. Alternatively, select the protocol/Application
from the drop-down menu.
Local IP:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Protocol:
Select the protocol of the traffic to allow or deny (
TCP
,
UDP
,
Both
,
or
Other
).
Protocol Number:
If you entered
Other
above, enter the protocol number.
External Port:
Enter the public port you want to open.
Internal Port:
Enter the private port you want to open.
Schedule:
Use the drop-down menu to select a schedule to apply. The schedule
may be set to
Always Enable
, or you can create your own schedules
in the
Schedules
section. Refer to
for more
information.
Click
Save
when you are done.
Name:
<< Application Name
⌵
Local IP:
<< Computer Name
⌵
Protocol:
TCP
⌵
External Port:
Internal Port:
Schedule
:
Always Enable
⌵
Create New Rule
Apply
