70
D-Link DIR-895L User Manual
Section 4 - Configuration - Router Mode
Smart Connect
Smart Connect:
When Smart Connect is enabled, the router automatically assigns
devices to the ideal wireless network to improve performance.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode:
Choose
None
,
WEP
, or
WPA/WPA2-Personal (
recommended).
Transmission
Power:
Select the desired wireless transmission power.
Schedule:
Use the drop-down menu to select a schedule to apply. The schedule
may be set to
Always Enable
, or you can create your own schedules
in the
Schedules
section. Refer to
for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
WPS-PBC Status:
Enable or disable WPS-PBC fuctionality.
WPS-PIN Status:
Enable or disable WPS-PIN functionality.
Refer to the next page if you wish to disable Smart Connect or click
Save
when you are done.
From this page you can configure your wireless network settings.
Wireless
DIR-895L HW:A1
FW:1.12
Settings >> Wireless
Settings
Home
Wireless
Features
Management
Use this section to configure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
Smart Connect
Smart Connect:
Enabled
Wi-Fi Name (SSID):
Your_Wi-Fi_Network
Password:
A_Str0nG_P@ssW0rd!%!
Advanced Settings ...
Guest Zone
Save
Wi-Fi Protected Setup
WPS-PBC Status:
Enabled
WPS-PIN Status:
Locked
Security Mode:
WPA/WPA2-Personal
⌵
Transmission Power:
High
⌵
Schedule:
Always Enable
⌵
