11
D-Link DIR-895L User Manual
Section 2 - Choosing an Operation Mode
Access Point
Create a Wireless Network using Ethernet
The DIR-895L operates as an
Access Point
when the mode switch is in the
Extender
position, the
Existing Network
is configured as
Ethernet
using the web configuration utility, and an Ethernet cable is connected from the WAN Ethernet Port to an uplink network.
Use this mode for:
• Extending your current network.
• Providing better signal for parts of your home or office that may have poor reception.
• Bringing Wi-Fi to an area it doesn't currently reach.
• Adding Wi-Fi to a wired network.
• Maximizing bandwidth.
• Creating a Wi-Fi pocket away from your existing network.
Note:
Extending a network to a desired location via Ethernet may require additional cable. The maximum length of Category 5/5E cables is limited
to 100 meters (330 feet). Use a Gigabit-capable Ethernet connection where possible to ensure the best networking experience.
To use your DIR-895L as an
Access Point
, refer to
.
Broadband
Connection Device
(e.g. DSL/Cable Modem)
Existing
Network
Internet
Wired and Wireless Devices
DIR-895L
