D-Link DGS-3000 series Скачать руководство пользователя

Страница: 49 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

Format

config 802.1x authorization attributes radius [enable | disable]

Parameters

radius

- If specified to enable, the authorization attributes (for example VLAN, 802.1p default

priority, and ACL) assigned by the RADUIS server will be accepted. The default state is
enabled.

enable

- Specify to enable the authorization attributes.

disable

- Specify to disable the authorization attributes.

Restrictions

Only Administrators, Operators and Power-Users can issue this command.

Example

The following example will disable to accept the authorized data assigned from the RADIUS server:

DGS-3000-26TC:admin#config 802.1x authorization attributes radius disable

Command: config 802.1x authorization attributes radius disable

Success.

DGS-3000-26TC:admin#

show 802.1x

4-10

Description

This command is used to display the 802.1X state or configurations.

Format

show 802.1x {[auth_state | auth_configuration] ports {<portlist>}}

Parameters

auth_state

- (Optional) Displays 802.1X authentication state machine of some or all ports.

auth_configuration

- (Optional) Used to display 802.1X configurations of some or all ports.

port

- (Optional) Specify a range of ports to be displayed. If no port is specified, all ports will be

displayed.

<portlist>

- Enter the list of ports used for the configuration here.

If no parameter is specified, the 802.1X system configurations will be displayed.

Restrictions

None.

Содержание DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3000 series

Отзывы:

Похожие инструкции для DGS-3000 series

Бренды по названию

Популярные бренды

D-Link DGS-3000 series, Справочное руководство

Результаты поиска

Содержание DGS-3000 series

Отзывы:

Похожие инструкции для DGS-3000 series

Бренды по названию

Популярные бренды