D-Link DGS-3000 series, Справочное руководство

Страница: 331 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
327
Chapter 28 DoS Attack Prevention
Command List
config dos_prevention dos_type [{land_attack | blat_attack | tcp_null_scan | tcp_xmasscan |
tcp_synfin | tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack} | all] {action
[drop] | state [enable | disable]}
show dos_prevention {land_attack | blat_attack | tcp_null_scan | tcp_xmasscan | tcp_synfin |
tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack}
config dos_prevention trap [enable | disable]
config dos_prevention log [enable | disable]
config dos_prevention dos_type 28-1
Description
This command is used to configure the prevention of each Denial-of-Service (DoS) attack,
including state and action. The packet matching will be done by hardware. For a specific type of
attack, the content of the packet will be matched against a specific pattern.
Format
config dos_prevention dos_type [{land_attack | blat_attack | tcp_null_scan | tcp_xmasscan
| tcp_synfin | tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack} | all]
{action [drop] | state [enable | disable]}
Parameters
land_attack - (Optional) Checks whether the source address is equal to destination address of a
received IP packet.
blat_attack - (Optional) Checks whether the source port is equal to destination port of a received
TCP packet.
tcp_null_scan - (Optional) Checks whether a received TCP packet contains a sequence number
of 0 and no flags
tcp_xmasscan - (Optional) Checks whether a received TCP packet contains URG, Push and
FIN flags.
tcp_synfin - (Optional) Checks whether a received TCP packet contains FIN and SYN flags.
tcp_syn_srcport_less_1024 - (Optional) Checks whether the TCP packets source ports are less
than 1024 packets.
ping_death_attack - (Optional) Detects whether received packets are fragmented ICMP
packets.
tcp_tiny_frag_attack - (Optional) Checks whether the packets are TCP tiny fragment packets.
all - Specify all DoS attack type.
action - (Optional) When enabling DoS prevention, the following actions can be taken.
drop - Drops DoS attack packets.
state - (Optional) Specify the DoS attack prevention state.
enable - Enables DoS attack prevention.
disable - Disabes DoS attack prevention.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.