D-Link DGS-3000 series, Справочное руководство

Страница: 312 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
308
config dhcpv6 pool excluded_address 24-15
Description
This command is used to configure the reserved IPv6 addresses on the DHCPv6 server. This
command will configure the IPv6 addresses range that the DHCPv6 server should not assign to
DHCPv6 client. The exclude address range must be the subset of the specified pool.
Format
config dhcpv6 pool excluded_address <pool_name 12> [add begin <ipv6addr> end
<ipv6addr> | delete [begin <ipv6addr> end <ipv6addr> | all]]
Parameters
<pool_name 12> - Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
add - Specify to add an excluded address range for a specified pool.
begin - Specify the beginning IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr> - Enter the beginning IPv6 address used here.
end - Specify the ending IPv6 address of the range of IPv6 addresses to be excluded from the
DHCPv6 pool.
<ipv6addr> - Enter the ending IPv6 address used here.
delete - Specify to delete one or all excluded address ranges of a specified pool.
begin - Specify the beginning IPv6 address of the range of IPv6 addresses to be excluded
from the DHCPv6 pool.
<ipv6addr> - Enter the beginning IPv6 address used here.
end - Specify the ending IPv6 address of the range of IPv6 addresses to be excluded from the
DHCPv6 pool.
<ipv6addr> - Enter the ending IPv6 address used here.
all - Specify to delete all excluded address ranges of a specified pool.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add the IPv6 addresses range that DHCPv6 server should not assign to clients:
DGS-3000-26TC:admin# config dhcpv6 pool excluded_address pool1 add begin
2000::3 end 2000::8
Command: config dhcpv6 pool excluded_address pool1 add begin 2000::3 end
2000::8
Success.
DGS-3000-26TC:admin#