D-Link DGS-3000 series Скачать руководство пользователя

Страница: 294 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

290

disable

- Specify to disable the DHCPv6 local relay function's state for the specified VLAN.

Restrictions

Only Administrators, Operators, and Power-Users can issue this command.

Example

To enable the DHCPv6 local relay function for the default VLAN:

DGS-3000-26TC:admin# config dhcpv6_local_relay vlan default state enable

Command: config dhcpv6_local_relay vlan default state enable

Success.

DGS-3000-26TC:admin#

config dhcpv6_relay option_18

23-9

Description

This command is used to configure the DHCPv6 relay agent information for processing option 18
within the switch.

Format

config dhcpv6_relay option_18 {state [enable | disable] | check [enable | disable] |
interface_id [default | cid | vendor1]}(1)

Parameters

state

- Specify the DHCPv6 relay Option 18's state.

enable

- Specify that the DHCPv6 relay Option 18's state is enabled. When the state is

enabled, the DHCP packet will be inserted with the Option 18 field before being relayed to
server.

disable

- Specify that the DHCPv6 relay Option 18's state is disabled. When the state is

disabled, the DHCP packet will be relayed directly to server without further checks and
inserted with the Option 18.

check

- Specify whether or not to check for the Option 18 field in incoming packets. If the

incoming packets contains an Option 18 field, then it will be dropped.

enable

- Specify to enable the check function.

disable

- Specify to disable the check function.

interface_id

- Specify the format of the Interface ID.

default

- Specify to used the default formation for the Interface ID.

F01

F02

Sub
Type

VLAN ID

1 byte

2 bytes

F01: Sub-type is 1 by default.
F02: VLAN ID. The incoming VLAN ID of the DHCP client packet.

cid

- Specify to use the CID format for the Interface ID.

F01

F02

F03

F04

Содержание DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3000 series

Отзывы:

Похожие инструкции для DGS-3000 series

Бренды по названию

Популярные бренды

D-Link DGS-3000 series, Справочное руководство

Результаты поиска

Содержание DGS-3000 series

Отзывы:

Похожие инструкции для DGS-3000 series

Бренды по названию

Популярные бренды