D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

Страница: 228 / 305

DGS-3312SR Layer 3 Gigabit Switch
222
DGS-3312SR:4#disable vrrp ping
Command: disable vrrp ping
Success.
DGS-3312SR:4#
create vrrp ipif
Purpose To create a VRRP IP interface on the switch.
Syntax <ipif_name 12> vrid <vrid 1-255> ipaddress <ipaddr> {state
[enable | disable] | priority <int 1-254> | advertisement_interval
<int 1-255> | preempt [true | false] | critical_ip <ipaddr> |
critical_ip_state [enable | disable]}
Description This command is used to create a VRRP interface on the switch.
Parameters <ipif_name 12> - Enter the name of a previously configured IP
interface that you wish to create a VRRP entry for. This IP interface
must be assigned to a VLAN on the switch.
vrid <vrid 1-255> - Enter a value between 1 and 255 to uniquely
identify this VRRP group on the switch. All routers participating in
this group must be assigned the same
vrid value. This value MUST
be different from other VRRP groups set on the switch.
ipaddress <ipaddr> - Enter the virtual IP address that will be
assigned to the VRRP entry. This IP address is also the default
gateway that will be statically assigned to end hosts and must be set
for all routers that participate in this group.
state [enable | disable] – Used to enable and disable the VRRP IP
interface on the switch.
priority <int 1-254> - Enter a value between 1 and 254 to indicate the
router priority. The VRRP Priority value may determine if a higher
priority VRRP router overrides a lower priority VRRP router. A higher
priority will increase the probability that this router will become the
Master router of the group. A lower priority will increase the
probability that this router will become the backup router. VRRP
routers that are assigned the same priority value will elect the
highest physical IP address as the Master router. The default value
is 100. (The value of 255 is reserved for the router that owns the IP
address associated with the virtual router and is therefore set
automatically.)
advertisement_interval <int 1-255> - Enter a time interval value, in
seconds, for sending VRRP message packets. This value must be
consistent with all routers participating within the same VRRP group
and is used to troubleshoot poorly configured routers. The default is
1 second.
preempt [true | false] – This entry will determine the behavior of
backup routers within the VRRP group by controlling whether a
higher priority backup router will preempt a lower priority Master
router. A
true entry, along with having the backup router’s priority set
higher than the masters priority, will set the backup router as the
Master router. A
false entry will disable the backup router from
becoming the Master router. This setting must be consistent with all
routers participating within the same VRRP group. The default
setting is
true .