manualshive.com logo in svg

D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

D-Link 3312SR - коммутатор с высокой производительностью, идеально подходит для предприятий. Пользователи могут скачать бесплатную версию Руководства по интерфейсу командной строки для получения дополнительной информации о настройках. Скачайте это руководство с manualshive.com и настройте свой коммутатор как профессионал.

Поделиться
Скачать
background image

DGS-3312SR Layer 3 Gigabit Switch

 

 

288

This Warranty applies on the condition that the product Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase.  A list 
of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. 

If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement of the product.  D-Link shall have the sole 
discretion whether to repair or replace, and replacement product may be new or reconditioned.  Replacement product shall be of equivalent or better 
specifications, relative to the defective product, but need not be identical.  Any product or part repaired by D-Link pursuant to this warranty shall have a warranty 
period of not less than 90 days, from date of such repair, irrespective of any earlier expiration of original warranty period.  When D-Link provides replacement, 
then the defective product becomes the property of D-Link. 

Warranty service may be obtained by contacting a D-Link office within the applicable warranty period, and requesting a Return Material Authorization (RMA) 
number.  If a Registration Card for the product in question has not been returned to D-Link, then a proof of purchase (such as a copy of the dated purchase 
invoice) must be provided.  If Purchaser's circumstances require special handling of warranty correction, then at the time of requesting RMA number, Purchaser 
may also propose special procedure as may be suitable to the case. 

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be 
damaged in transit, and the RMA number must be prominently marked on the outside of the package. The package must be mailed or otherwise shipped to 
D-Link with all costs of mailing/shipping/insurance prepaid. D-Link shall never be responsible for any software, firmware, information, or memory data of 
Purchaser contained in, stored on, or integrated with any product returned to D-Link pursuant to this warranty. 

Any package returned to D-Link without an RMA number will be rejected and shipped back to Purchaser at Purchaser's expense, and D-Link reserves the right 
in such a case to levy a reasonable handling charge in addition mailing or shipping costs. 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within the applicable warranty period.  A list of D-Link offices is 
provided at the back of this manual, together with a copy of the Registration Card.  If a Registration Card for the product in question has not been returned to a 
D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.  The term "purchase" 
in this software warranty refers to the purchase transaction and resulting license to use such software. 

D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such 
software product, for a period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller.  D-Link warrants the magnetic media, on 
which D-Link provides its software product, against failure during the same warranty period.  This warranty applies to purchased software, and to replacement 
software provided by D-Link pursuant to this warranty, but shall not apply to any update or replacement which may be provided for download via the Internet, or 
to any update which may otherwise be provided free of charge. 

D-Link's sole obligation under this software warranty shall be to replace any defective software product with product which substantially conforms to D-Link's 
applicable product documentation. Purchaser assumes responsibility for the selection of appropriate application and system/platform software and associated 
reference materials. D-Link makes no warranty that its software products will work in combination with any hardware, or any application or system/platform 
software product provided by any third party, excepting only such products as are expressly represented, in D-Link's applicable product documentation as being 
compatible.  D-Link's obligation under this warranty shall be a reasonable effort to provide compatibility, but D-Link shall have no obligation to provide 
compatibility when there is fault in the third-party hardware or software. D-Link makes no warranty that operation of its software products will be uninterrupted 
or absolutely error-free, and no warranty that all defects in the software product, within or without the scope of D-Link's applicable product documentation, will 
be corrected. 

Содержание 3312SR - Switch


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3312SR - Switch

CAME FROG PLUS Manual preview
FROG PLUS
Бренд: CAME Страницы: 2
QCT QuantaMesh T1048-LB9 Installation Manual preview
QuantaMesh T1048-LB9
Бренд: QCT Страницы: 42
I/O Interconnect SV142P1 User Manual preview
SV142P1
Бренд: I/O Interconnect Страницы: 27
Hamlet XHUB330LAN User Manual preview
XHUB330LAN
Бренд: Hamlet Страницы: 4
Lindy 32 277 Installation And Use Manual preview
32 277
Бренд: Lindy Страницы: 38
Accton Technology ES4710BD User Manual preview
ES4710BD
Бренд: Accton Technology Страницы: 547
H-Tronic TS 1000 Instruction Manual preview
TS 1000
Бренд: H-Tronic Страницы: 15
Eminent EM1019 Instruction Manual preview
EM1019
Бренд: Eminent Страницы: 6
Bircher Reglomat ESR25 Operating Instructions preview
ESR25
Бренд: Bircher Reglomat Страницы: 4
Eaton TRIPP LITE U360-004-IND Owner'S Manual preview
TRIPP LITE U360-004-IND
Бренд: Eaton Страницы: 56
Eaton TRIPP LITE U460-003-3AG Owner'S Manual preview
TRIPP LITE U460-003-3AG
Бренд: Eaton Страницы: 32
Mo-vis P030-11 Installation Manual preview
P030-11
Бренд: Mo-vis Страницы: 25
Wise P941 Instruction Manual preview
P941
Бренд: Wise Страницы: 8
Rose electronics Vista DVI Plus Installation And Operation Manual preview
Vista DVI Plus
Бренд: Rose electronics Страницы: 24
Rose electronics Vista Mini Installation And Operation Manual preview
Vista Mini
Бренд: Rose electronics Страницы: 24
Rose electronics SuperSwitch SS-9 Installation And Operation Manual preview
SuperSwitch SS-9
Бренд: Rose electronics Страницы: 28
Rose electronics ServeView 2X Installation And Operation Manual preview
ServeView 2X
Бренд: Rose electronics Страницы: 34
ZyXEL Communications XGS-4728F User Manual preview
XGS-4728F
Бренд: ZyXEL Communications Страницы: 426

Бренды по названию

Популярные бренды

Загрузить еще бренды