manualshive.com logo in svg

D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

D-Link 3312SR - коммутатор с высокой производительностью, идеально подходит для предприятий. Пользователи могут скачать бесплатную версию Руководства по интерфейсу командной строки для получения дополнительной информации о настройках. Скачайте это руководство с manualshive.com и настройте свой коммутатор как профессионал.

Поделиться
Скачать
background image

DGS-3312SR Layer 3 Gigabit Switch 

 

293

The warranty periods listed above are effective in respect of all D-LINK products sold in European Countries by D-LINK or one of its authorized resellers or 

distributors from 1st of January 2004.  All products sold in European Countries by D-LINK or one of its authorized resellers or distributors before 1st January 

2004 carry 5 years warranty, except power supplies, fans and accessories that are provided with 2 year warranty. 

The warranty period stated in this card supersedes and replaces the warranty period as stated in the user’s manual or in the purchase contract for the relevant 

products. For the avoidance of doubt, if you have purchased the relevant D-LINK product as a consumer your statutory rights remain unaffected. 

Performance of the Limited Product Warranty

 

If a product defect occurs, D-LINK’s sole obligation shall be to repair or replace any defective product free of charge to the original purchaser provided it is 

returned to an Authorized D-LINK Service Center during the warranty period. Such repair or replacement will be rendered by D-LINK at an Authorized D-LINK 

Service Center. All component parts or hardware products removed under this limited warranty become the property of D-LINK. The replacement part or product 

takes on the remaining limited warranty status of the removed part or product. The replacement product need not be new or of an identical make, model or part; 

D-LINK may in its discretion replace the defective product (or any part thereof) with any reconditioned equivalent (or superior) product in all material respects 

to the defective product. Proof of purchase may be required by D-LINK.  

Warrantor

 

D-Link (Europe) Ltd. 

4th Floor, Merit House 

Edgware Road 

Colindale 

London NW9 5 AB 

United Kingdom 

 

Telephone: +44-020-8731-5555 

Facsimile: +44-020-8731-5511 

www.dlink.co.uk

 

 

D-Link Europe Limited Produktgarantie 

Allgemeine Bedingungen 

 

Die hierin beschriebene eingeschränkte Garantie wird durch D-LINK (Europe) Ltd. gewährt (im Folgenden: „D-LINK“). Diese eingeschränkte Garantie setzt 

voraus, dass  der Kauf des Produkts nachgewiesen wird. Auf Verlangen von D-LINK muss auch dieser Garantieschein vorgelegt werden. 

AUSSER IN DEM HIER AUSDRÜCKLICH BESCHRIEBENEN UMFANG GEWÄHRT D-LINK KEINE WEITEREN GARANTIEN, WEDER 

AUSDRÜCKLICH NOCH STILLSCHWEIGEND. INSBESONDERE WIRD NICHT STILLSCHWEIGEND EINE GARANTIE FÜR DIE ALLGEMEINE 

GEBRAUCHSTAUGLICHKEIT ODER DIE EIGNUNG FÜR EINEN BESTIMMTEN ZWECK ERKLÄRT. D-LINK LEHNT AUSDRÜCKLICH JEDE 

GARANTIE AB, DIE ÜBER DIESE EINGESCHRÄNKTE GARANTIE HINAUSGEHT. JEDE GESETZLICH ANGEORDNETE GARANTIE IST AUF DIE 

LAUFZEIT DER EINGESCHRÄNKTEN GARANTIE BESCHRÄNKT. IN EINIGEN STAATEN ODER LÄNDERN IST DIE ZEITLICHE 

BESCHRÄNKUNG EINER STILLSCHWEIGEND ERKLÄRTEN GARANTIE SOWIE AUSSCHLUSS ODER BESCHRÄNKUNG VON 

SCHADENERSATZ FÜR NEBEN- ODER FOLGESCHÄDEN BEIM VERBRAUCHSGÜTERKAUF UNTERSAGT. SOWEIT SIE IN SOLCHEN STAATEN 

ODER LÄNDERN LEBEN, ENTFALTEN MÖGLICHERWEISE EINIGE AUSSCHLÜSSE ODER EINSCHRÄNKUNGEN DIESER EINGESCHRÄNKTEN 

GARANTIE GEGENÜBER IHNEN KEINE WIRKUNG. DIESE EINGESCHRÄNKTE GARANTIE GEWÄHRT IHNEN SPEZIFISCHE RECHTE. 

DARÜBER HINAUS STEHEN IHNEN MÖGLICHERWEISE NOCH WEITERE RECHTE ZU, DIE SICH JEDOCH VON STAAT ZU STAAT ODER VON 

LAND ZU LAND UNTERSCHEIDEN KÖNNEN. UM DEN UMFANG IHRER RECHTE ZU BESTIMMEN, WIRD IHNEN EMPFOHLEN, DIE 

ANWENDBAREN GESETZE DES JEWEILIGEN STAATES ODER LANDES ZU RATE ZU ZIEHEN.  

Diese eingeschränkte Garantie ist auf Hardware-Produkte der Marke D-LINK (insgesamt im Folgenden: „D-LINK Hardware-Produkte“) anwendbar, die von D-

LINK (Europe) Ltd. oder dessen weltweiten Filialen, Tochtergesellschaften, Fachhändlern oder Länderdistributoren (insgesamt im Folgenden: „D-LINK“) mit 

dieser eingeschränkten Garantie verkauft wurden. Der Begriff „D-LINK Hardware-Produkte” beinhaltet nur Hardwarekomponenten und deren Bestandteile 

einschließlich Firmware. Der Begriff “D-LINK Hardware-Produkte“ umfasst KEINE Software-Anwendungen oder -programme. 

Räumlicher Geltungsbereich der eingeschränkten Garantie

 

Diese eingeschränkte Garantie gilt für alle genannten europäischen Staaten gemäß dem Anhang „Eingeschränkte Garantie von D-LINK in europäischen Staaten“. 

Im Rahmen dieser eingeschränkten Garantie sind mit dem Begriff „europäische Staaten” nur die im Anhang genannten Staaten gemeint. Die eingeschränkte 

Garantie findet überall Anwendung, wo       D-LINK oder dessen autorisierte Servicepartner Garantiedienste gemäß den Bestimmungen dieser eingeschränkten 

Garantie erbringen. Gleichwohl kann sich die Verfügbarkeit von Garantiediensten  und die Bearbeitungszeit von Land zu Land unterscheiden und von 

Registrierungsanforderungen abhängig sein.  

Einschränkung der Garantie

 

D-LINK gewährleistet, dass die nachstehend  aufgeführten Produkte bei gewöhnlicher Verwendung für die unten angegebene Laufzeit der eingeschränkten 

Garantie („Garantielaufzeit“) frei von wesentlichen Verarbeitungs- und Materialfehlern sind. Voraussetzung hierfür ist jedoch, dass das Produkt entsprechend 

dem Benutzerhandbuch und den weiteren Dokumentationen, die der Benutzer beim Kauf (oder später) erhalten hat, genutzt und gewartet wird. D-LINK 

garantiert nicht, dass die Produkte störungs- oder fehlerfrei arbeiteten oder dass alle Mängel, Fehler, Defekte oder Kompatibilitätsstörungen beseitigt werden 

können. 

Diese Garantie gilt nicht für Probleme wegen: (a) unerlaubter Veränderung oder Hinzufügung, (b) Fahrlässigkeit, Missbrauch oder Zweckentfremdung, 

einschließlich des Gebrauchs des Produkts entgegen den Spezifikationen oder den durch Schnittstellen gegebenen Vorgaben, (c) fehlerhafter Bedienung, (d) 

Versagen von Produkten oder Diensten, die nicht von D-LINK stammen oder nicht Gegenstand einer zum maßgeblichen Zeitpunkt gültigen Garantie- oder 

Содержание 3312SR - Switch


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3312SR - Switch

BABBITT LS8000 Owner'S Manual preview
LS8000
Бренд: BABBITT Страницы: 14
BABBITT LS6000 Owner'S Manual preview
LS6000
Бренд: BABBITT Страницы: 10
Pakedge SX-8P Quick Start Manual preview
SX-8P
Бренд: Pakedge Страницы: 24
Panduit ATLONA Omega AT-OME-MS52W Manual preview
ATLONA Omega AT-OME-MS52W
Бренд: Panduit Страницы: 123
Panduit Atlona AT-OME-MS42 Manual preview
Atlona AT-OME-MS42
Бренд: Panduit Страницы: 86
Techroutes S3756 Hardware Installation Manual preview
S3756
Бренд: Techroutes Страницы: 22
Gilat SkyEdge II-c Capricorn Pro 4 AC Series Installation Notes preview
SkyEdge II-c Capricorn Pro 4 AC Series
Бренд: Gilat Страницы: 2
IMC Networks iMcV-Giga-FiberLinX-II Operation Manual preview
iMcV-Giga-FiberLinX-II
Бренд: IMC Networks Страницы: 60
TRENDnet TEG-30284 Quick Installation Manual preview
TEG-30284
Бренд: TRENDnet Страницы: 12
Maiwe MIEN1203-F User Manual preview
MIEN1203-F
Бренд: Maiwe Страницы: 5
Cabletron Systems SEH-22 User Manual preview
SEH-22
Бренд: Cabletron Systems Страницы: 56
Goobay MS-506PQ-N User Manual preview
MS-506PQ-N
Бренд: Goobay Страницы: 16
Top View KS-104OSD User Manual preview
KS-104OSD
Бренд: Top View Страницы: 13
Digitus DS-55511 Manual preview
DS-55511
Бренд: Digitus Страницы: 10
Black Box LGB5028A Installation Manual preview
LGB5028A
Бренд: Black Box Страницы: 44
Omega Engineering LVU-230 User Manual preview
LVU-230
Бренд: Omega Engineering Страницы: 16
Black Box 26611 Datasheet preview
26611
Бренд: Black Box Страницы: 2
Gefen EXT-DPKVM-441 User Manual preview
EXT-DPKVM-441
Бренд: Gefen Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды