D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

Страница: 220 / 305

DGS-3312SR Layer 3 Gigabit Switch
214
config dst
Parameters disable - Disable the DST seasonal time adjustment for the Switch.
repeating - Using repeating mode will enable DST seasonal time
adjustment. Repeating mode requires that the DST beginning and
ending date be specified using a formula. For example, specify to
begin DST on Saturday during the second week of April and end DST
on Sunday during the last week of October.
annual - Using annual mode will enable DST seasonal time
adjustment. Annual mode requires that the DST beginning and ending
date be specified concisely. For example, specify to begin DST on
April 3 and end DST on October 14.
s_week - Configure the week of the month in which DST begins.
•
<start_week 1-4,last> - The number of the week during the
month in which DST begins where 1 is the first week, 2 is
the second week and so on, last is the last week of the
month.
e_week - Configure the week of the month in which DST ends.
•
<end_week 1-4,last> - The number of the week during the
month in which DST ends where 1 is the first week, 2 is the
second week and so on, last is the last week of the month.
s_day – Configure the day of the week in which DST begins.
•
<start_day sun-sat> - The day of the week in which DST
begins expressed using a three character abbreviation (sun,
mon, tue, wed, thu, fri, sat)
e_day - Configure the day of the week in which DST ends.
•
<end_day sun-sat> - The day of the week in which DST
ends expressed using a three character abbreviation (sun,
mon, tue, wed, thu, fri, sat)
s_mth - Configure the month in which DST begins.
•
<start_mth 1-12> - The month to begin DST expressed as a
number.
e_mth - Configure the month in which DST ends.
•
<end_mth 1-12> - The month to end DST expressed as a
number.
s_time – Configure the time of day to begin DST.
•
<start_time hh:mm> - Time is expressed using a 24-hour
clock, in hours and minutes.
e_time - Configure the time of day to end DST.
•
<end_time hh:mm> - Time is expressed using a 24-hour
clock, in hours and minutes.
s_date - Configure the specific date (day of the month) to begin DST.
•
<start_date 1-31> - The start date is expressed numerically.
e_date - Configure the specific date (day of the month) to begin DST.
•
<end_date 1-31> - The end date is expressed numerically.
offset [30 | 60 | 90 | 120] - Indicates number of minutes to add or to
subtract during the summertime. The possible offset times are
30,60,90,120. The default value is 60.