manualshive.com logo in svg

D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

D-Link 3312SR - коммутатор с высокой производительностью, идеально подходит для предприятий. Пользователи могут скачать бесплатную версию Руководства по интерфейсу командной строки для получения дополнительной информации о настройках. Скачайте это руководство с manualshive.com и настройте свой коммутатор как профессионал.

Поделиться
Скачать
background image

DGS-3312SR Layer 3 Gigabit Switch 

 

3

London NW9 5 AB 

Royaume-Uni 

 

Tél : +44-020-8731-5555 

Fax : +44-020-8731-5511 

www.dlink.co.uk

 

Garantía limitada del producto D-LINK Europa 

Condiciones generales 

Esta garantía la ofrece D-LINK (Europe) Ltd. (en este documento, "D-LINK"). La garantía limitada del producto sólo es válida si se acompaña del comprobante 

de la compra. También deberá presentarse la tarjeta de garantía si D-LINK lo solicita. 

EXCEPTO EN LO EXPRESAMENTE INDICADO EN ESTA GARANTÍA LIMITADA, D-LINK NO CONCEDE OTRAS GARANTÍAS, NI EXPLÍCITAS 

NI IMPLÍCITAS, INCLUIDAS LAS GARANTÍAS IMPLÍCITAS DE COMERCIALIDAD Y APTITUD A UN FIN DETERMINADO. D-LINK RECHAZA 

EXPLÍCITAMENTE CUALQUIER GARANTÍA QUE NO FIGURE EN ESTA GARANTÍA LIMITADA. LA DURACIÓN DE CUALQUIER GARANTÍA 

IMPLÍCITA QUE PUEDA SER IMPUESTA POR LEY QUEDA LIMITADA AL PERÍODO DE LA GARANTÍA LIMITADA. ALGUNOS ESTADOS O 

PAÍSES NO PERMITEN QUE EN LA GARANTÍA LIMITADA DE PRODUCTOS DE CONSUMO SE RESTRINJA LA DURACIÓN TEMPORAL, NI QUE 

SE EXCLUYAN O LIMITEN LOS DAÑOS INCIDENTALES O RESULTANTES PARA EL CONSUMIDOR DE LOS PRODUCTOS. EN ESTOS 

ESTADOS O PAÍSES, A USTED NO LE PUEDEN APLICAR ALGUNAS EXCLUSIONES O LIMITACIONES DE LA GARANTÍA LIMITADA. ESTA 

GARANTÍA LIMITADA LE CONCEDE DETERMINADOS DERECHOS. PUEDE, TAMBIÉN, TENER OTROS DERECHOS, QUE PUEDEN SER 

DISTINTOS DE UN ESTADO A OTRO O DE UN PAÍS A OTRO. SE RECOMIENDA QUE CONSULTE LAS LEYES PERTINENTES DE UN ESTADO O 

PAÍS A FIN DE QUE CONOZCA SUS DERECHOS. 

Esta garantía limitada se aplica a los productos de hardware de la marca D-LINK (llamados en esta guía “Productos de hardware D-LINK”) comprados a D-

LINK (Europe) Ltd., a sus filiales en el mundo, a sus proveedores autorizados o a sus distribuidores locales (llamados en este documento “D-LINK”) con esta 

garantía limitada. El término “producto de hardware D-LINK” se restringe a los componentes de hardware y a los componentes internos de estos, incluyendo el 

firmware. El término “producto de hardware D-LINK” NO incluye ni las aplicaciones ni los programas de software. 

 

Cobertura geográfica de la garantía limitada del producto

 

Esta garantía limitada del producto es válida en todos los países europeos que figuran en el apéndice “Países europeos de la garantía limitada del producto D-

LINK”. En esta garantía limitada del producto D-Link, el término “países europeos” sólo incluye los países que figuran en el apéndice. La garantía limitada del 

producto será válida en cualquier país en el que D-LINK o sus proveedores autorizados de servicios ofrezcan un servicio de garantía sujeto a los términos y 

condiciones recogidos en esta garantía limitada del producto. Sin embargo, la disponibilidad del servicio de garantía, así como el tiempo de respuesta, pueden 

variar de un país a otro y pueden estar sujetos a requisitos de registro.  

 

Limitación de la garantía del producto

 

D-LINK garantiza que los productos descritos más adelante están libres de defectos de fabricación y materiales, en condiciones normales de uso, a lo largo del 

período de la garantía limitada del producto que se indica en este documento ("período de la garantía limitada del producto"), si el producto se ha utilizado y 

mantenido conforme a lo recogido en el manual del usuario o en otra documentación que se haya proporcionado al comprador en el momento de la compra (o 

que se haya corregido). D-LINK no garantiza que los productos funcionarán sin interrupciones o sin errores, ni que se corregirán todas las deficiencias, errores, 

defectos o disconformidades. 

Esta garantía no cubre problemas derivados de: (a) modificaciones o conexiones no autorizadas; (b) negligencia, abuso o mal uso, incluyendo el incumplimiento 

de las especificaciones y de los requisitos de la interfaz en el funcionamiento del producto; (c) manejo incorrecto; (d) errores en artículos o servicios ajenos a D-

LINK o no sujetos a una garantía o un contrato de mantenimiento vigentes de D-LINK; (e) uso o almacenamiento incorrecto; o (f) fuego, agua, casos fortuitos u 

otros hechos catastróficos. Esta garantía tampoco es válida para aquellos productos a los que se haya eliminado o alterado de algún modo el número de serie D-

LINK.   

 

D-LINK NO SE RESPONSABILIZA DE LOS DAÑOS CAUSADOS COMO CONSECUENCIA DEL INCUMPLIMIENTO DE LAS INSTRUCCIONES DEL 

PRODUCTO DE HARDWARE D-LINK. 

 

Período de la garantía limitada del producto 

 

El período de la garantía limitada del producto se inicia en la fecha en que se realizó la compra a D-LINK. Para el comprador, el comprobante de la fecha de la 

compra es el recibo de la venta o de la entrega, en el que figura la fecha de la compra del producto. Puede ser necesario tener que presentar el comprobante de la 

compra a fin de que se preste el servicio de garantía. El comprador tiene derecho al servicio de garantía conforme a los términos y condiciones de este documento, 

si requiere una reparación del hardware de la marca D-LINK dentro del período de garantía limitada del producto.  

Esta garantía limitada del producto cubre sólo al originario comprador-usuario final de este producto de hardware D-LINK, y no es transferible a otras personas 

que reciban el producto de hardware D-LINK del originario comprador-usuario final. 

Tipo de producto 

Período de garantía del producto 

Conmutadores gestionados (p. ej., conmutadores con agente SNMP integrado) 
(incluyendo módulos y software de gestión) 

Cinco (5) años 

Содержание 3312SR - Switch


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3312SR - Switch

DANLERS CESF PIR Installation Notes preview
CESF PIR
Бренд: DANLERS Страницы: 2
H3C s5800 series Configuration Manual preview
s5800 series
Бренд: H3C Страницы: 22
H3C S5500-EI series Quick Start preview
S5500-EI series
Бренд: H3C Страницы: 2
Lantronix SM8TAT2SA Quick Start Manual preview
SM8TAT2SA
Бренд: Lantronix Страницы: 2
Matrix Switch Corporation MSC-DE1664 Product Manual preview
MSC-DE1664
Бренд: Matrix Switch Corporation Страницы: 60
Sams RSS-10v User Manual For Use And Maintenance preview
RSS-10v
Бренд: Sams Страницы: 14
Gefen ToolBox GTB-MHDMI1.3-441 User Manual preview
ToolBox GTB-MHDMI1.3-441
Бренд: Gefen Страницы: 25
PRO SIGNAL PSG3061 Quick Start Manual preview
PSG3061
Бренд: PRO SIGNAL Страницы: 4
Scion SC03.4101 Operation Manual preview
SC03.4101
Бренд: Scion Страницы: 8
Bühler technologies Nivotemp NT-EL Installation And Operation Instructions Manual preview
Nivotemp NT-EL
Бренд: Bühler technologies Страницы: 20
AV-Box WUH5-H2 User Manual preview
WUH5-H2
Бренд: AV-Box Страницы: 11
SLV 470819 Quick Installation Manual preview
470819
Бренд: SLV Страницы: 22
HighSecLabs K304 Quick Start Manual preview
K304
Бренд: HighSecLabs Страницы: 2
TLS Electronics 875300 User Manual preview
875300
Бренд: TLS Electronics Страницы: 12
Goobay MS-506PQ-N User Manual preview
MS-506PQ-N
Бренд: Goobay Страницы: 16
Top View KS-104OSD User Manual preview
KS-104OSD
Бренд: Top View Страницы: 13
National Instruments CPS-8910 Getting Started Manual preview
CPS-8910
Бренд: National Instruments Страницы: 8
Parallax Power Supply ATS 501 Series Manual preview
ATS 501 Series
Бренд: Parallax Power Supply Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды