D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

Страница: 222 / 305

DGS-3312SR Layer 3 Gigabit Switch
216
30
ARP C
OMMANDS
The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command Parameters
create arpentry <ipaddr> <macaddr>
delete arpentry [<ipaddr> | all]
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static}
config arp_aging time <value 0-65535>
clear arptable
Each command is listed, in detail, in the following sections.
create arpentry
Purpose Used to make a static entry into the ARP table.
Syntax
create arpentry <ipaddr> <macaddr>
Description This command is used to enter an IP address and the
corresponding MAC address into the switch’s ARP table.
Parameters
< ipaddr>
−
The IP address of the end node or station.
<macaddr>
−
The MAC address corresponding to the IP address
above.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To create a static ARP entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
DGS-3312SR:4#create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DGS-3312SR:4#
delete arpentry
Purpose Used to delete a static entry into the ARP table.
Syntax delete arpentry {<ipaddr> | all}
Description This command is used to delete a static ARP entry, made using
the
create arpentry command above, by specifying either the IP
address of the entry or all. Specifying all clears the switch’s ARP
table.
Parameters
<ipaddr>
−
The IP address of the end node or station.