manualshive.com logo in svg

D-Link 3312SR - Switch, Справочное руководство по интерфейсу командной строки

D-Link 3312SR - коммутатор с высокой производительностью, идеально подходит для предприятий. Пользователи могут скачать бесплатную версию Руководства по интерфейсу командной строки для получения дополнительной информации о настройках. Скачайте это руководство с manualshive.com и настройте свой коммутатор как профессионал.

Поделиться
Скачать
background image

DGS-3312SR Layer 3 Gigabit Switch

 

 

2

Wartungsvereinbarung sind, (e) Fehlgebrauch oder fehlerhafter Lagerung oder (f) Feuer, Wasser, höherer Gewalt oder anderer Katastrophen. Diese Garantie gilt 

ebenfalls nicht für Produkte, bei denen eine D-LINK-Seriennummer entfernt oder auf sonstige Weise unkenntlich gemacht wurde. 

D-LINK STEHT NICHT FÜR SCHÄDEN EIN, DIE DADURCH ENTSTEHEN, DASS DIE ANLEITUNG FÜR DAS D-LINK HARDWARE-PRODUKT 

NICHT BEFOLGT WIRD. 

Laufzeit der eingeschränkten Garantie

 

Die Laufzeit der eingeschränkten Garantie beginnt mit dem Zeitpunkt, zu dem das Produkt von D-LINK gekauft wurde. Als Nachweis für den Zeitpunkt des 

Kaufs gilt der datierte Kauf- oder Lieferbeleg. Es kann von Ihnen verlangt werden, dass Sie zur Inanspruchnahme von Garantiediensten den Kauf des Produkts 

nachweisen. Wenn Ihre Hardware-Produkte der Marke D-LINK innerhalb der Laufzeit der eingeschränkten Garantie eine Reparatur benötigen, so sind Sie 

berechtigt, gemäß den Bedingungen dieser eingeschränkten Garantie Garantiedienste in Anspruch zu nehmen.  

Diese eingeschränkte Garantie gilt nur für denjenigen, der das D-LINK Hardware-Produkt ursprünglich als originärer Endbenutzer gekauft hat. Sie ist nicht auf 

Dritte übertragbar, die das D-LINK-Produkt von dem ursprünglichen originären Endbenutzer erworben haben. 

Produkttyp Gewährleistungslaufzeit 

Verwaltete Switches (d. 

h. Switches mit eingebauten SNMP-Agents) 

(einschließlich Modulen und Verwaltungssoftware) 

Fünf (5) Jahre 

Alle weiteren Produkte 

Zwei (2) Jahre 

Ersatzteile (z.B. externe Netzteile, Lüfter) 

Ein (1) Jahr 

 

Die oben aufgeführten Garantielaufzeiten gelten für alle D-LINK-Produkte, die in europäischen Staaten ab dem 1. Januar 2004 von D-LINK oder einem 

autorisierten Fachhändler oder Distributor verkauft werden. Alle vor dem 1. Januar 2004 von D-LINK oder einem autorisierten Vertragshändler oder Distributor 

verkauften Produkte haben eine Gewährleistung von 5 Jahren; ausgenommen sind Netzteile, Lüfter und Zubehör, diese haben eine Garantie von 2 Jahren. 

Die durch diesen Garantieschein festgelegte Garantielaufzeit tritt an die Stelle der im Benutzerhandbuch oder im Kaufvertrag für das jeweilige Produkt 

angegebenen Laufzeit. Sollten Sie das betreffende D-LINK-Produkt als Verbraucher erworben haben, so sei klargestellt, dass Ihre gesetzlichen Rechte hiervon 

unberührt bleiben. 

Leistungsumfang der eingeschränkten Garantie

 

Bei Auftreten eines Produktfehlers besteht die einzige Verpflichtung von D-LINK darin, dem ursprünglichen Käufer das defekte Produkt kostenlos zu reparieren 

oder es auszutauschen. Voraussetzung hierfür ist, dass das Produkt während der Garantielaufzeit einem autorisierten D-LINK-Servicecenter übergeben wird. 

Reparatur oder Austausch werden von D-LINK durch ein autorisiertes D-LINK-Servicecenter durchgeführt. Bauteile oder Hardware-Produkte, die gemäß dieser 

eingeschränkten Garantie entfernt werden, gehen in das Eigentum von D-LINK über. Die verbliebene eingeschränkte Garantie des entfernten Teils oder Produkts 

wird auf das Ersatzteil oder -produkt übertragen. Das Austauschprodukt muss weder neu sein noch dem defekten Produkt ganz oder in Teilen entsprechen. D-

LINK darf dieses nach eigenem Ermessen gegen ein entsprechendes wiederaufbereitetes Produkt austauschen, welches dem defekten Produkt im Wesentlichen 

entspricht (oder höherwertig ist). D-LINK kann verlangen, dass der Kauf des Produkts nachgewiesen wird.  

DIE VORSTEHENDE GARANTIE WURDE IN DIE DEUTSCHE SPRACHE AUS DEM ENGLISCHEN ÜBERSETZT. BEI ABWEICHUNGEN 

ZWISCHEN DER ENGLISCHEN VERSION UND DER DEUTSCHEN ÜBERSETZUNG GELTEN DIE BESTIMMUNGEN DER ENGLISCHEN VERSION. 

Garantiegeber

 

D-Link (Europe) Ltd. 

4th Floor, Merit House 

Edgware Road 

Colindale 

London NW9 5 AB 

Vereinigtes Königreich 

 

Telefon: +44-020-8731-5555 

Fax: +44-020-8731-5511 

www.dlink.com

 

D-Link Europe a limité la garantie des produits 

Conditions Générales 

 

La Garantie Produit Limitée énoncée ci-dessous émane de D-LINK (Europe) Ltd. (ci-après « D-LINK »). Cette Garantie Produit Limitée n’est valable que sur 

présentation de la preuve d’achat. D-LINK peut également exiger la présentation du présent bon de garantie. 

SAUF INDICATION EXPLICITE DES PRESENTES, D-LINK NE FOURNIT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS 

UNE GARANTIE IMPLICITE DE VALEUR MARCHANDE OU D’ADAPTATION DU PRODUIT A UN USAGE PRECIS. D-LINK DECLINE 

EXPLICITEMENT TOUTE GARANTIE NON ENONCEE DANS LES PRESENTES. TOUTE GARANTIE IMPLICITE IMPOSEE PAR LA LOI, LE CAS 

ECHEANT, EST LIMITEE DANS SA DUREE A CELLE DE LA GARANTIE LIMITEE. CERTAINS ETATS OU PAYS NE PERMETTENT PAS DE 

LIMITER LA DUREE DE LA GARANTIE IMPLICITE OU INTERDISENT D’EXCLURE OU DE LIMITER LA COUVERTURE DES DOMMAGES 

Содержание 3312SR - Switch


















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3312SR - Switch

NETGEAR DS104 Installation Manual preview
DS104
Бренд: NETGEAR Страницы: 15
H3C S9500 Series Operation Manual preview
S9500 Series
Бренд: H3C Страницы: 204
H3C H3C S7500E Series Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 44
H3C H3C S7500E Series Configuration Examples preview
H3C S7500E Series
Бренд: H3C Страницы: 11
H3C H3C S7500E Series Command Reference Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 25
H3C CR19000-16 Installation, Quick Start preview
CR19000-16
Бренд: H3C Страницы: 46
IDK MSD-804FD Series Command Manual preview
MSD-804FD Series
Бренд: IDK Страницы: 133
IDK MSD-72 Series User Manual preview
MSD-72 Series
Бренд: IDK Страницы: 150
IDK MSD-501 Command Reference Manual preview
MSD-501
Бренд: IDK Страницы: 101
IDK MSD-402 Command Reference Manual preview
MSD-402
Бренд: IDK Страницы: 85
IDK IMP-400UHD Command Reference Manual preview
IMP-400UHD
Бренд: IDK Страницы: 40
IDK FDX-32 User Manual preview
FDX-32
Бренд: IDK Страницы: 97
IDK FDX-S Series User Manual preview
FDX-S Series
Бренд: IDK Страницы: 117
IDK FDX-16 User Manual preview
FDX-16
Бренд: IDK Страницы: 77
Magnetrol TK1 Operating Manual preview
TK1
Бренд: Magnetrol Страницы: 12
Magnimage V4 Series User Manual preview
V4 Series
Бренд: Magnimage Страницы: 53
Dataprobe iBoot-G2 Instructions Manual preview
iBoot-G2
Бренд: Dataprobe Страницы: 21
Panio HW2250K User Manual preview
HW2250K
Бренд: Panio Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды