background image

DGS-3312SR Layer 3 Gigabit Switch 

 

289

 

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: 

• 

Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and 

• 

Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, 

U.S. Military Installations, or addresses with an APO or FPO.  

Limited Warranty:

   

D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in 

workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except 

as otherwise stated herein.  

• 

Hardware (excluding power supplies and fans): Five (5) Years 

• 

Power supplies and fans: One (1) Year 

• 

Spare parts and spare kits: Ninety (90) days 

The customer's sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to repair or 

replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid.  Any repair or 

replacement will be rendered by D-Link at an Authorized D-Link Service Office.  The replacement hardware need not be new or have an identical make, model 

or part.  D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is 

substantially equivalent (or superior) in all material respects to the defective Hardware.  Repaired or replacement hardware will be warranted for the remainder of 

the original Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions.  If a material defect is incapable of 

correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the 

defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.  All Hardware or part thereof that is replaced by D-Link, or for 

which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. 

Limited Software Warranty: 

 

D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current 

functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of 

ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its 

documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of 

physical defects.  The customer's sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s 

option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the 

Software or to refund the portion of the actual purchase price paid that is attributable to the Software.  Except as otherwise agreed by D-Link in writing, the 

replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.  

Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions.  If a material 

non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price 

paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is 

first returned to D-Link.  The license granted respecting any Software for which a refund is given automatically terminates. 

Non-Applicability of Warranty: 

 

The Limited Warranty provided hereunder for Hardware and Software portions of D-Link's products will not be applied to 

and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the 

sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold "As-Is" without any 

warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.

  

 

Submitting A Claim

:  

The customer shall return the product to the original purchase point based on its return policy.  In case the return policy period has 

expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below: 

 

 

The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient 

detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if 

the product is not registered. 

 

The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any 

suspected defects with the product.  If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by 

completing the RMA form and entering the assigned Case ID Number at 

https://rma.dlink.com/

 

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will 

not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.  Do not include any manuals or accessories 

in the shipping package.  D-Link will only replace the defective portion of the product and will not ship back any accessories. 

 

The customer is responsible for all in-bound shipping charges to D-Link.  No Cash on Delivery (“COD”) is allowed.  Products sent COD will either be 

rejected by D-Link or become the property of D-Link.  Products shall be fully insured by the customer and shipped to 

D-Link Systems, Inc., 17595 Mt. 

Herrmann, Fountain Valley, CA 92708

.  D-Link will not be held responsible for any packages that are lost in transit to D-Link.  The repaired or 

replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.  Return shipping charges shall be prepaid 

by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon 

request and provided shipping charges are prepaid by the customer. 

 

Содержание 3312SR - Switch


















































































































































































































































































































Отзывы: