D.A.S. M-14:2, Руководство по эксплуатации

Страница: 7 / 27

5
M-14:2
PROFESSIONAL STEREO MIXER
Front Panel
Front Panel
1. MONO INPUT SECTION
1. MIC INPUT
A 3-pin XLR-type connector is used for balanced low
impedance microphone inputs. (1: sleeve, 2: hot, 3: cold)
Microphones of 50-600
Ω
line level devices can be connected
here.
When the PHANTOM switch is turned on, DC +48V will be
supplied to pins 2 and 3 of these connectors.
It is important that, during operation or testing of the mixer,
all channel faders remain fully down whenever the mic input
is not properly terminated with a microphone or equivalent
150-ohm source.
An open mic invites the introduction of high noise levels
which could produce lower quality sound or an incorrect test
measurement.
1
2
3
4
5
6
7
8
9
10
11
2 1
3
PHASE (Normal)
1. GND
2. ( + )
3. ( )
PHASE (Reverse)
1. GND
2. ( )
3. ( + )
MIC Input Jack Pin
2
1
3
Phantom Power
2
3
+48V
+48V
0V
GROUND