D.A.S. M-14:2 Скачать руководство пользователя | Manualshive

Страница: 3 / 27

background image

1

M-14:2

PROFESSIONAL STEREO MIXER

Welcome

Welcome

All of the co-workers here at D.A.S ELECTRONICS are dedicated to providing excellent products with inherently
good value, and we are delighted you have purchased one of our products.

We sincerely trust this product will provide years of satisfactory service, but if anything is not to your
complete satisfaction, we will endeavor to make things right.

Welcome to D.A.S ELECTRONICS, and thank you for becoming part of our worldwide extended family!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

*Do not install this equipment in a confined space such as a book case or similar unit.
*The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
*Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used

near water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so than objects do not fall and liquids are not spilled into the enclosure through openings.”

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of suf-ficient
magnitude to constitute a risk of electric shock to
persons.

This symbol is intended to alert the user to the
presence of important operation and mainte-nance
(servicing) instructions in the literature accompanying
the appliance.

Caution: To prevent electric shock do not use this (polarized) plug with

an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade expo-sure.

Attentions: Pour prévenir les chocs électriques ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de courant
on une autre sortie de courant, sauf si les lames peuvent
étre insérées à fond sans en laisser aucune partie à
découvert.

«
1
2
3
4
5
...
»

Содержание M-14:2




























Отзывы:

Нет отзывов

Похожие инструкции для M-14:2

Into the Unknown

Бренд: PARASIT STUDIO Страницы: 5

Бренд: Stage right Страницы: 16

Бренд: Omcan Страницы: 16

Бренд: G+M Elektronik Страницы: 3

Бренд: Kambrook Страницы: 24

Бренд: Fairlight Страницы: 69

DIGITAL iPAD/TABLET MIXER iX16

Бренд: Behringer Страницы: 4

BMHD0250 Signature Collection

Бренд: Wolfgang Puck Страницы: 8

Бренд: IBM Страницы: 64

Бренд: Kogan Страницы: 6

Harmony DCB8000

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 18

Бренд: Philips Страницы: 17

Бренд: Samson Страницы: 2

Бренд: Omcan Страницы: 28

Бренд: Pioneer Страницы: 2

Бренд: Pioneer Страницы: 23

Бренд: Pioneer Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды