D.A.S. M-14:2, Руководство по эксплуатации

Страница: 11 / 27

9
M-14:2
PROFESSIONAL STEREO MIXER
6. AUX 2 CONTROLS
This knobs control the level of the signals sent to AUX 2 bus.
The channel signals mixed by this bus have their overall level set by the AUX2 SEND Control to the AUX
SEND 2 jack on the rear panel.
The aux2 bus signal is also fed into the internal digital signal processor.
Since this control is placed after the channel fader, the signal level will be affected by the channel fader
setting.
7. BALANCE CONTROL
This control adjusts the balance or the L/R position of the stereo input signal.
Turning the BALANCE control to the left of center moves the apparent source toward the MAIN MIX L bus,
turning it to the right moves the source toward the MAIN MIX R bus.
8. MUTE/ALT 3-4 SWITCH
When the Mute/ALT 3-4 switch is depressed, a channel output will be routed to the ALT 3-4 output instead
of the main mix.
ALT 3-4 bus offers you a second independent stereo submix with its own submaster stereo fader.
9. SOLO SWITCH
When these switch are engaged, the channel input signal can be routed to the solo bus.
This switch allows you to monitor the post-fader channel input signal through headphone outputs and control
room outs.
10. CHANNEL FADER
This is the channel s main level control. It determines the level of the signal that is sent from the channel to the
master mixing and effect buses. It is the settings of the input channel faders that determine the mix, or the
balance of sound levels between the instruments or other sources connected to the inputs.
When a channel is not being used, its fader should be set at the minimum position to prevent the addi-tion of
unwanted noise to the main program signal.