cytiva AKTA go, Руководство по эксплуатации

Страница: 58 / 130

Part Function
7 External monitor
1
An adaptor might be required to connect the HDMI cable to the external PC, depending on the avail-
able display ports.
2
The connection type depends on the monitor setup. An adaptor might be required if the monitor does
not have an HDMI port.
Connect to the external PC
To connect the Amersham ImageQuant 800 to the external PC, use the following
procedure.
Step Action
1 Place the external computer in the VESA mount (1) attached to the rear of
the instrument.
2 Insert the USB3.0 cable into the USB3.0 port at the rear of the instrument.
Connect the other end of the cable to the external PC.
3 If an external monitor is not being used, connect the
USB2.0 cable to the
USB2.0 port at the rear of the instrument. Connect the other end of the
cable to the external PC.
4 Connect the
HDMI cable to the display port on the external computer.
1
1
An adaptor might be required to connect the HDMI cable to the external PC,
depending on the available display ports.
4 Installation
4.5 System setup
4.5.1 Connections
58 Amersham ImageQuant 800 Operating Instructions 29372604 AC