CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
6
Introduction
1.1.3
Other Suggested Tools
You can use the following USB protocol analyzers to analyze the traffic between the PC host and the
FX3 device.
■
Hardware analyzers
❐
Ellisys USB Explorer 280
❐
Lecroy USB Voyager M3i
❐
Beagle USB 5000 SuperSpeed Protocol Analyzer
■
Software protocol analyzers
❐
SourceQuest SourceUSB
❐
SysNucleus USBTrace
1.2
Additional Learning Resources
Visit
http://www.cypress.com/fx3
for additional learning resources in the form of datasheets, a
technical reference manual, and application notes.
1.3
Document History
1.4
Documentation Conventions
Revision
PDF Creation
Date
Origin of
Change
Description of Change
**
06/23/2011
MRKA
Initial version of kit guide
*A
08/11/2011
MRKA
Updated figures and table in section 2.1.4; added section 2.1.4.1.
Updated Table 2-3 and Figure 2-11. Added Figure 2-12.
*B
12/22/2012
NMMA
Updated Getting Started chapter.
Added the Hardware chapter.
Added the Appendix chapter.
*C
03/30/2014
RSKV
Explained three firmware example projects.
Added information on debugging using UART and JTAG.
Added information on the GPIF II interconnect boards.
Table 1-1. Document Conventions for Guides
Convention
Usage
Courier New
Displays file locations, user entered text, and source code:
C:\ ...cd\icc\
Italics
Displays file names and reference documentation:
Read about the
sourcefile.hex
file in the
PSoC Designer User Guide
.
[
Bracketed, Bold
]
Displays keyboard commands in procedures:
[
Enter
] or [
Ctrl
] [
C
]
File > Open
Represents menu paths: File > Open > New Project
Bold
Displays commands, menu paths, and icon names in procedures:
Click the
File
icon and then click
Open
.
Times New Roman
Displays an equation:
2 + 2 = 4
Text in gray boxes
Describes cautions or unique functionality of the product.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
