CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
26
Getting Started
The following steps configure the Eclipse project to be compatible with the J-Link debugger. Some
Cypress projects are already configured, so you only need to confirm the settings. Once a project is
configured the settings are in force for all subsequent debug sessions.
1. Select your project in the Project Explorer, then select
Run > Debug Configurations
(
Figure 2-27
).
Figure 2-27. Select Project and Choose Run>Debug Configurations...
2. Right-click the
Zylin Embedded debug (Native)
item and select
New
to define a debug
configuration (
Figure 2-28
).
Figure 2-28. Create a new Debug Configuration
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
